TRICONEX 3721C

Brand:TRICONEX

Type:3721C

Origin: the United States

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

Spare parts spare parts, the main DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

Electro-magnetic Compatibility and Electrical Safety PM866/TP830 meets the requirements specified in EMC Directive 89/336/EEC. For more information regarding electrical safety, see Appendix D, Directive Considerations. LED Indicators See Table 20 on page 179. Performance Data The PM866 processor unit has performance data which is approximately 1.4 times the performance of PM864. In redundant configuration the execution performance is somewhat lower than in single configuration. Switch over time from Primary CPU to Backup CPU, in redundant configuration, is less than 10 ms.

MPC8270 Microprocessor running at 450 MHz. • 256 MB RAM with integrity check (shadow memory). • Optical ModuleBus interface that is designed for a maximum of seven clusters, of twelve non-redundant or six redundant modules (that is, 7x12 = 84 modules). Redundant and nonredundant modules can be combined. • Three on-board communication ports: – CN1 + CN2 (built in, 10/100Mbit/s) Ethernet ports (IEEE 802.3u, 10 Base-T/100Base-Tx). – COM4 (built in) serial port (RS-232C) for service tool. • Two Redundancy Control Links — RCU Control Link and RCU Data Link — for use in redundant configuration. • Secure Digital (SD) card slot that supports the SD card for loading of application and for saving the cold retain values cyclically. The SD cards of various manufacturers are supported.

Memory • 16 MB flash PROM (firmware storage). • 256 MB of DDR2 SDRAM with integrity check. Power Dissipation 15.8 W typical 19.5 W typical (incl. full supply to ModuleBus and CEXBus. Current Consumption 660 mA typical (750 mA max.) (excl. supply of ModuleBus and CEX-Bus). Power Input Connector Four pin, screw connector L+, L–, SA and SB. Power Supply Requirements Inputs designated L+ and L– 24 V nominal, variation between 19.2 V DC and 30 V DC. Redundant Power Supply Status Inputs Inputs designated SA, SB • Max input voltage 30 V • Min. input voltage for high level 15 V • Max input voltage for low level 8 V These are status inputs and the threshold levels are limits for logic "0" or "1" on the inputs, that is, not power fail limits. Power Reservoir 5 ms Protection Rating IP20 according to EN60529, IEC 529. Weight 1.6 kg (1.9 kg with package) Dimensions W 200 x H 186 x D 102 mm (7.9 x 7.3 x 4.0 in) Width is measured along the DIN-rail, depth from the wall, and height vertically, including lock mechanism.