6000L/h Transformer Oil Dehydration Equipment, Insulating Oil Drying Process
6000L/h Transformer Oil Dehydration Equipment, Insulating Oil Drying Process
Application
ASSEN 6000L/h Transformer Oil Dehydration Equipment are portable maintenance equipment, it is a process the reduces, or in fact, eliminates all the physical contaminants from oils and oil dryting process, using physical processes such as oil filtration, dehumidification, and degasification. DVTP transformer oil purifier machines process effectively removes all those particles that are larger than 1 micron as well as most of the dissolved water and gases in the oil. Enhance the value of breakdown voltage over 75-80KV.
Transformer Oil Treatment Plant's Features
1. Pre-Electromagnetic-valve before vacuum pump to prevent the vacuum oil flow backwards.
2. Double-stage vacuum system, strong power of vacuum evacuating, ultimate vacuum value ≤ 5Pa
3. Two vacuum separating chambers, efficient oil film sprayer, increasing separating size and separating time to ensure the dry-level and dielectric strength improving greatly.
4. Duplex-Stereo film evaporation technology, combined with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil.
5.Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.
6. Pre-gas-water separator before vacuum pump to prolong the vacuum pump and vacuum pump oil.
7. Double protecting system, Gas-water separator equips liquid level protector to prevent oil escape from vacuum pump
8. Optical oil foam detector and high oil level detector to prevent oil escape from vacuum pump
9. Low oil level sensor to prevent oil pump idle working, so prolong oil pump lifetime
10. Completely Intelligent pressure protector to protect oil pump and fine filter
11. Completely Intelligent vacuum controller to protect the booster pump
12. Fully intelligent temperature controller to prevent the large surge current
13. Phases protector, voltage overload protector to achieve unattended
Technical Parameters
After treatment
Moisture |
PPM |
≤3 |
Gas content |
% |
≤0.01 |
Impurity size |
μ |
≤1 (no free carbon) |
Breakdown voltage |
kV |
≥75 |
IFT |
dynes/cm |
≥40 |
Acid value |
mgKOH/g |
≤0.03 |
Dielectric loss factors |
tgδ(90°C) |
≤0.001 |
Main Parts
Assen's Information
Professional
20 years experience of manufacturing and exporting oil purification machines
Reliable
24/7 after service and technical support
Efficient
Customized your waste oil solutions by our team
Assen's Factory
Contact information
Sky ZHOU, Sales Manager
Email: sky8tears@gmail.com
Tel/whatsapp +8618523178237
Website:
Send Inquiry to This Supplier
You May Also Like
-
Replaceable Regeneration Tank Transformer Oil Regeneration MachineUS$ 5500 - 12500MOQ: 1 Metric Ton
-
PLC Control System Vacuum Transformer Oil Filtration Machine, Insulating Oil RefinerUS$ 8800 - 12500MOQ: 1 Cubic Meter
-
Transformer Oil Regeneration Decolor and Acid Remove MachineUS$ 5500 - 12500MOQ: 1 Metric Ton
-
PLC High Vacuum Transformer Oil Purification Process MachineUS$ 8800 - 12500MOQ: 1 Cubic Meter
-
150L/s High Efficiency Transformer Vacuum Pumping System, Transformer EvacuationUS$ 8500 - 13500MOQ: 1 Cubic Meter
-
PLC 6000L/h Double-stage High Vacuum Transformer Oil Filtration EquipmentUS$ 8800 - 12500MOQ: 1 Cubic Meter
-
Coalescence-separation Turbine Oil Filtration MachineUS$ 5500 - 12500MOQ: 1 Unit
-
Dry Air Generator Machine Recycling of Air Drying and RegenerationUS$ 5500 - 12500MOQ: 1 Unit
-
Fuel Oil Purification System Water Separator MachineUS$ 5500 - 12500MOQ: 1 Unit
-
COP Cooking Oil Purifier MachineUS$ 5500 - 12500MOQ: 1 Unit







