Contact Platform Support
Help CenterKRD11 Series Mechanical High Speed Shock Test Systems/Pneumatic Vertical Shock Tester
Related Products
-
Chinese Manufacturer Hot Sale KRD10 Series Hydraulic Vertical Shock Testing EquipmentNegotiableMOQ: 1 Set -
Wholesale Customized Pneumatic Horizontal Shock Test Equipment for Product ReliabilityNegotiableMOQ: 1 Set
-
High G Shock Testing High Energy Shock Test Machine for Product ReliabilityNegotiableMOQ: 1 Set
-
KRD20 Series High Accuracy Automatic Pneumatic Bump Test Machine for Electronic ProductsNegotiableMOQ: 1 Set
-
MIL-S-901D Standard High Impact Shock Testing Equipment for Ship Board MachineryNegotiableMOQ: 1 Set
KRD11 series pneumatic vertical shock test system is a fully automatic pneumatic lifting vertical shock test system. It is vertical shock test equipment with novel design, high degree of automation, simple operation and convenient maintenance. It is used to measure and determine the impact resistance of products or packaging, and assess the functional reliability and structural integrity of the test product in a shock environment, thereby improving the system or optimizing the structure of the product. The system meets the requirements of both shock and bump test, can perform conventional half-sine wave, post-peak sawtooth wave, trapezoid wave and other waveform shock tests.
Pneumatic drive, simple structure and high reliability, without hydraulic leak risk.
Maximum shock rate up to 120 times / min.
Impact testing for small pulse lower to 0.3ms
Shock testing machine with high acceleration is up to 3000g
It can easily realize large shock pulse width and small overload test.
With a fast shock rate comparing to motor or hydraulic driven bump table, it has higher reliability and better bump waveform.
The speed and rate of shock can be easily controlled by adjusting the gas pressure.
IPS-2000 shock control and measurement system can perform manual shock, continuous shock (bump test), single shock, and interval shock.
Built-in brake mechanism ensures the safety of operation in any situation.
Technical Specifications
|
Model Parameters |
KRD 11－5 |
KRD 11－15 |
KRD 11－25 |
KRD 11－50 |
KRD 11－100 |
KRD 11－200 |
KRD 11－400 |
KRD 11－600 |
KRD 11－800 |
KRD 11－1000 |
KRD 11－2000 |
|
Rated Load (kg) |
5 |
15 |
25 |
50 |
100 |
200 |
400 |
600 |
800 |
1000 |
||
Table Size (mm) |
150×150 |
200×200 |
300×300 |
500×500 |
600×600 |
800×600 |
800×800 |
1000×800 |
1000×1000 |
1200×1200 |
1500×1200 |
|
Peak Acc. (g) |
Half-Sine |
5-2500 |
5-2000 |
5-1500 |
10-750 |
10-600 |
10-450 |
10-400 |
10-300 |
10～300 |
10～250 |
10～150 |
|
Post-Peak Sawtooth |
10-200 |
10-100 |
10-50 |
|||||||||
Trapezoid |
/ |
15-200 |
15-100 |
15-60 |
15-50 |
|||||||
Pulse Duration (ms) |
Half-Sine |
0.4～40 |
0.5～40 |
0.6～60 |
1.5～60 |
2～60 |
2.5～60 |
3～60 |
3.5～60 |
4～60 |
4.5～60 |
6～60 |
|
Post-Peak Sawtooth |
3～18 |
6～18 |
||||||||||
Trapezoid |
/ |
3～18 |
6～18 |
|||||||||
|
Bump Waveform (Optional) |
Half-sine Waveform |
|||||||||||
|
Bump Peak Acceleration （g） |
5~150 |
5~120 |
5~100 |
5~80 |
5~60 |
5~40 |
/ |
|||||
Bump Pulse Duration (ms) |
2~30 |
3~30 |
4 ~ 30 |
5 ~ 30 |
/ |
|||||||
|
Bump Rate (Times/Min) |
10~120 |
10~100 |
10~80 |
10~60 |
10~40 |
10~30 |
/ |
|||||
Overall Dimension (mm) |
1000×1000 ×2100 |
1000×1000 ×2160 |
1510×1300 ×2400 |
1690×1240 ×2350 |
1710×1160 ×2350 |
1910×1500 ×2700 |
1910×1500 ×2500 |
1900×1500 ×2450 |
2000×1500 ×2450 |
1900×1800 ×2550 |
2200×1800 ×2550 |
|
Weight (kg) |
1300 |
2300 |
3000 |
3070 |
3900 |
4500 |
5000 |
5200 |
5600 |
6200 |
7300 |
|
Working Environment |
Temperature range 0 ~ 40℃, Humidity≤80% (non-condensing) |
|||||||||||
Power |
1-phase AC220V±10% 50Hz |
|||||||||||
Air source |
≤0.8MPa |
|||||||||||
|
Installation Condition |
Foundation-free, the cement floor shall be leveled and the working distance of 800~1000mm shall be reserved around the equipment |
|||||||||||
Standards |
MIL-STD-810 IEC68-2-27 MIL-STD-202 MIL-STD-750 MIL-STD-883 UN38.3 IEC62281 IEC62133-2 UL2054 IEEE1625 SAEJ2929 IEC62660-2 ISO12405-3 UL2580 |
|||||||||||
Note: 1. The parameters in the table are for reference only, and the parameters agreed upon by the supplier and the buyer shall prevail.
2. Bump function, Post-peak Sawtooth and Trapezoid waveforms are optional.
Standards
Transportation Safety Standards (UN 38.3 / IEC 62281)
Product Safety Standards (IEC 62133-2 / UL 2054 / UL 2580)
Electric Vehicle Traction Battery Standards (IEC 62660-2 / SAEJ2929 / ISO 12405-3)
Military/Environmental Test Standard (MIL-STD-810 Method 516.8 – Shock Test)
Test Results
100kg load half-sine shock, target peak acceleration: 100g, pulse width: 11ms
100kg load half-sine shock, target peak acceleration: 500g, pulse width: 1.6ms
Project References
Send Inquiry to This Supplier
You May Also Like
-
Hot Selling Pneumatic Horizontal Shock Test Equipment for ProductsNegotiableMOQ: 1 Set
-
Factory Direct Customized High Energy Shock Test MachineNegotiableMOQ: 1 Set
-
KRD20 Pneumatic Bump Test MachineNegotiableMOQ: 1 Set
-
KRD17 Pneumatic Bidirectional Vertical Shock Testing SystemUS$ 10000 - 100000MOQ: 1 Set
-
KRD10 Hydraulic Vertical Shock Test SystemNegotiableMOQ: 1 Set
-
KRD20 Pneumatic Bump Test MachineNegotiableMOQ: 1 Set
-
KRD13 High Energy Shock Test MachineNegotiableMOQ: 1 Set
-
KRD16 MIL-S-901D High Impact Shock Test SystemNegotiableMOQ: 1 Set
-
KRD12 Pneumatic Horizontal Shock Test SystemNegotiableMOQ: 1 Set
-
Hot Selling Pneumatic Vertical Shock/Bump Test Equipment From ChinaNegotiableMOQ: 1 Set
