Contact Platform Support
Help CenterPaint VOCs Treatment Equipment Activated Carbon Desorption Box
Related Products
-
VOCs Waste Gas Treatment Equipment in Spray BoothUS$ 7500 - 23500MOQ: 1 Set -
VOCs Efficient Spray TowerUS$ 7500 - 22500MOQ: 1 Set
-
Dipdye VOCs UV Photocatalytic Oxidation EquipmentUS$ 7500 - 22500MOQ: 1 Set
-
All-in-one Waste Gas Treatment Machine for VOCs Paint BoothUS$ 7000 - 23000MOQ: 1 Set
-
Cultivate VOCs Waste Gas Treatment EquipmentUS$ 6500 - 24500MOQ: 1 Set
I. operating principle of activated carbon adsorption tower
Dust gas is powered by the fan, positive or negative pressure into the tower, due to the presence of non-equilibrium and unsaturated activated carbon solid surface
So that when the solid surface comes into contact with the gas, it attracts the gas molecules, causing them to condense and remain on the solid surface
On the surface, the pollutants are absorbed, and the exhaust gas, after passing through the filter, enters into the dust removal system of the equipment, and purifies the air to be discharged to the standard at high altitude.
1. High adsorption efficiency, large adsorption capacity and wide application
2. Easy maintenance, no technical requirements
3. Large specific surface area, good selective adsorption
4. Activated carbon has a wide range of sources and low price
5. High adsorption efficiency and strong capacity
6. Easy operation
Activated carbon used for a period of time, adsorption of a large number of adsorbents, gradually saturated, lost the ability to work, serious will penetrate the filter
Layer, therefore should carry out the change of activated carbon.
Adsorption process: due to the presence of unbalanced and unsaturated molecular attraction or chemical bond on the solid surface, when the solid surface with gas
When a body comes into contact, it attracts the gas molecules, making them condense and stay on the solid surface. This phenomenon is called adsorption.Use solid surface suction
The adhesion ability makes the exhaust gas contact with the porous solid material on the large surface, and the pollutants in the exhaust gas are adsorbed on the solid surface to make it with
The gas mixture is separated to achieve the purpose of purification.
2. Structure composition of activated carbon adsorption device
1. Activated carbon adsorption and purification device, adsorption fan, etc.
2. Application scope of activated carbon adsorption device: the device is used in the treatment of organic waste gas with large air volume and low concentration, and can handle benzene, ketone,
Alcohol-alkanes and their mixed organic waste gas are mainly used in chemical industry, machinery, electronics, electrical appliances, coating, shoe-making, rubber and plastics
, printing and various industrial production workshops produced by the purification of harmful gases.Activated carbon adsorption tower, the use of high-performance activated carbon adsorption
The surface force of the solid itself attracts the adsorbents of organic waste gas molecules to the surface of the adsorbent, which can contain benzene, alcohol, ketone and ester
Waste gas adsorption of organic solvents such as gasoline, suitable for waste gas treatment with large air volume and low concentration, applicable to electronics, chemical industry, light industry,
Rubber, paint, coating, printing, machinery, shipping, automotive, oil and other industries.The activated carbon adsorption device mainly consists of activated carbon layer
And the supporting layer.Activated carbon has developed voids, large specific surface area, has a high adsorption capacity.It's because of activated carbon
This characteristic, it is widely used in the treatment of water, such as domestic water, sewage after the (clean water) treatment.
Iv. Equipment maintenance and maintenance
1. During the operation of this equipment, it is forbidden to open the maintenance door, if the fan is to be closed for maintenance.
2. Check the inside of the equipment for one month.
(1) check whether the activated carbon filter box is cracked or damaged, otherwise it should be corrected.
(2) check whether the equipment is damaged or broken, otherwise it should be corrected.
(3) check whether the screw of the door of the equipment is loose, otherwise it needs to be corrected.
3. Do not flush the inside of the equipment with water.
4. Non-engineering technical personnel, do not modify by themselves, in order to avoid normal work.
5. Replace activated charcoal every three months.
Send Inquiry to This Supplier
You May Also Like
-
Plastic VOCs Low Temperature Plasma MachineUS$ 7000 - 20000MOQ: 1 Set
-
Activated Carbon Adsorption Unit for Textile VOCs TreatmentUS$ 7000 - 22000MOQ: 1 Set
-
Specialized in the Manufacture of Air - Borne Precipitation MachineUS$ 7000 - 23000MOQ: 1 Set
-
Professional Manufacture of Integrated Dissolved Air Floating MachineUS$ 3000 - 20000MOQ: 1 Set
-
Air Floatation Precipitator All-in-one Multi-effect Air Floatation PrecipitatorUS$ 3000 - 27000MOQ: 1 Set
-
Flat Flow Gas Precipitation FilterUS$ 7000 - 22500MOQ: 1 Set
-
Pretreatment of Breeding and Slaughtering Wastewater Dissolved Air Floatation PrecipitatorUS$ 3000 - 227000MOQ: 1 Set
-
Coating Wastewater Treatment Equipment Integration of Small Sewage Treatment EquipmentUS$ 6500 - 22500MOQ: 1 Set
-
Integrated Domestic Sewage Industrial Wastewater Treatment EquipmentUS$ 6500 - 22500MOQ: 1 Set
-
Sewage Treatment Complete Set of Equipment Buried Integrated Sewage Treatment EquipmentUS$ 6500 - 22500MOQ: 1 Set
