Sludge Dehydrator Belt Thickener Filter Press

Main structural features:

The belt filter press has compact structure, novel style, convenient operation and management, large processing capacity, low filter cake moisture content and good effect.Compared with similar equipment, it has the following characteristics:

1 gravity dehydration section is inclined, which makes the sludge up to 1700mm from the ground, increases the height of sludge in the gravity dehydration section, and improves the gravity dehydration capacity.

2. Length of gravity dehydration section the length of the second gravity dehydration section is more than 5m, making the sludge fully dehydrate and lose fluidity before pressing.At the same time, the gravity dehydration section is also set up with special mechanisms such as reversal, through "wedge" shape, "S" shape press, etc., the sludge filter cake can obtain low water content.

The three dewatering rollers adopt "T" type drainage tank, so that the large amount of water after pressing can be discharged quickly, so as to improve the dehydration effect.

4. Automatic control device is provided for the strainer belt deviation, the strainer belt tension and the strainer belt moving speed can be adjusted freely, and the operation and management are convenient.！

5. Low noise and no vibration.

6. Low dosage of chemical drugs.

Main features:

Tailings sludge, sand sludge, special machine, reduce the amount of medicine, large processing capacity, good dehydration effect, especially suitable for tailings sludge, sand sludge, environmental protection dehydration treatment.