Contact Platform Support
Help CenterPE Tube Extruder Equipment Production Line
Related Products
-
PVC/PE Bellows Extruder Production LineUS$ 30000 - 35000MOQ: 1 Set -
PVC Pipe One Out Two Extruder EquipmentUS$ 20000 - 25007MOQ: 1 Set
-
PVC Double Gavities Conduit Pipe Extrusion LineUS$ 39393 - 40000MOQ: 1 Set
-
PVC Pipe Extruder EquipmentUS$ 60000 - 60606MOQ: 1 Set
-
PE Coil Extruder Production LineUS$ 40444 - 45444MOQ: 1 Set
Basic introduction of PE pipe production line
PE pipe extrusion equipment is mainly used in the production of agricultural drainage pipes, building drainage, cable laying and other aspects.This machine is composed of vertical dryer, high efficiency single screw main engine, PE mould, vacuum sizing box, spray box, multi-claw tractor, material rack and so on.
1. Single-screw extruder and tractor adopt imported ac inverter speed regulating device, vacuum pump and traction motor adopt high-quality products.
2. The tractor has two claws, three claws, four claws, six claws, eight claws, twelve claws and other traction
3. Can choose no chip cutting, saw blade cutting, or planetary cutting, reliable performance, high production efficiency.
4. Planet cutting is controlled by automatic computer, which has the advantages of convenient operation and reliable performance.
Adopt imported frequency control device, vacuum pump and traction motor all adopt high quality products.Tractor has two claw, three claw, four claw, six claw, eight claw, ten claw, twelve claw and other traction.Can choose no chip cutting, saw blade cutting or planetary cutting, reliable performance, high production efficiency.The company can produce inner wall spiral tube, inner wall hollow tube and core foam tube unit after the replacement of extruder according to the requirements of users, and can produce PP, PE, ABS, PPR, PEX, silicon core tube and other materials.The planetary cutting machine adopts fully automatic computer numerical control, which has the advantages of easy operation and reliable performance, reaching the international level.
With single screw extruder, suitable for particle material extrusion, high yield, up to 1000kg/h
The pipe diameter range is 75mm-1000mm
This production line adopts reasonable design, economical and durable
Low energy consumption, main motor USES frequency conversion motor.High energy consumption at the same time
The efficient extruder designed and manufactured by our company according to the unique processing performance of PPR and PE, equipped with new type barrel and screw, has the characteristics of high speed foundation and high speed, high extrusion volume, low melting temperature of materials, remarkable energy saving effect, specially designed co-extruder die head, reasonable flow path, smooth inside and outside wall of tube, low internal stress.Production Ф diameter range of 70 ~ Ф 1000 mm, the production output up to 1000 / min.One machine can produce HDPE silicon core pipe, ordinary pp-r, PE pipe.Low cost: the cost of nano-antibacterial tube is only 5-10% higher than that of ordinary tube.Wide range of applicable processing;Spiral split-type head, can be equipped with static mixing system, the material layer is fully superimposed on each other, compared with the traditional scaffolding die head, the internal pressure distribution is more uniform
Send Inquiry to This Supplier
You May Also Like
-
PC Lampshade Shell Extruder EquipmentUS$ 20000 - 25000MOQ: 1 Set
-
Sheet Surface Coating MachineUS$ 0.1 - 0.2MOQ: 1 Set
-
Ppr Pipe Double Out Extrusion Production LineUS$ 0.1 - 0.2MOQ: 1 Set
-
Pvc Pipe Expansion MachineUS$ 0.1 - 0.2MOQ: 1 Set
-
Imitating Marble Plate ExtruderUS$ 0.1 - 0.2MOQ: 1 Set
-
Pvc Plastic Angle Protection Line ExtruderUS$ 0.1 - 0.2MOQ: 1 Set
-
300 Wide Wood Skin Coating MachineUS$ 0.1 - 0.2MOQ: 1 Set
-
Plastic Mixer，Plastic Raw Material Mixing MachineUS$ 0.1 - 0.2MOQ: 1 Set
-
Dividing and Cutting Machine，Tape Cutting MachineUS$ 0.1 - 0.2MOQ: 1 Set
-
Single-screw Plastic ExtrudersUS$ 0.1 - 0.2MOQ: 1 Set
