Wire & Cable Bundle Flaming Tester
ST-7603S Wire & Cable Bundle Flaming Tester (Ladder type Flaming Tester)
Standard:According to GB18380.31:2008, IEC60332-3-10:2000,GB/T19666-2005,and clause 6.3.1of GA306.1-2007
Scope: Apply to evaluate suppression ability of spread of fire for bundles installed wires and cables ,under specified conditions
Main components: Testing chamber, electric control system, air source, ignition source flew control system (propane gas and air compressed gas), steel elevator, Fire extinguishing devices, emissions purification equipment (user option),
Technical parameters:
1. Burning inner size: W1000*D2000*H4000mm
2. Entrance air flow(speed): 5000±500L/min;
3. Burning ladder frame: W500mm*H3500mm and W800mm*H3500mm, With automatic up and down device
4. Fuel gas: Nominal purity 95% technical propane
5. Burner: 20.5±0.5kW belt type
6. Testing environment: Outer wing speed≤8m/s or temperature of inner testing wall during 5°C~40°C
7. Burning timer: The time is applying flame to specimen continuously, and range is 0.1-999.9min setting and displaying continuously
8. Sustained burning timer: The time is after stop to supply the burner gas and the test sample still flaming or lighting, and the range is 0.1-999.9min timing continuously
9. Air flow-meter: 1~100 L/min Qty.: 2pcs
10. Gas flow-meter: 1~50 L/min, Qty. :2pcs
Send Inquiry to This Supplier
You May Also Like
-
Wires & Cables Smoke Density TesterNegotiableMOQ: 1 Unit
-
ST-7602L Halogen Release TesterNegotiableMOQ: 1 Unit
-
Single Cable Vertical Flaming TesterNegotiableMOQ: 1 Unit
-
ST-9601 Lower Temperature Test ChamberNegotiableMOQ: 1 Unit
-
ST-9602P Programmable Temperature & Humidity Test ChamberNegotiableMOQ: 1 Unit
-
ST-9603 Xenon Lamp Aging ChamberNegotiableMOQ: 1 Unit
-
ST-9606F Forced-Convection Aging OvenNegotiableMOQ: 1 Set
-
ST-9611 Splash Water Protection Test ChamberNegotiableMOQ: 1 Set
-
Insulation Stripping MachineUS$ 2666 - 3000MOQ: 1 Unit
-
ST-8601 Conductor Elongation TesterUS$ 888 - 1888MOQ: 1 Unit