No corrosion Aluminum alloys water soluble cutting mahining oil

Water-soluble cutting oil

LY-Y303

LY-Y303 water-soluble cutting oil is made by oiliness agent and kinds of compound additives. It has the perfect performance of lubrication, cooling and rust protection. LY-Y303  is suitable for all kinds of cutting and grinding work on ferrous and nonferrous metal. It is a common type of water-soluble cutting oil

1.    Characteristics

1.1 Non-toxic, no smell, no stimulation for skin.

1.2 Good performance of E.P., lubrication, cooling, rust protection.

1.3 Improve the processing efficiency , reduce powder consumption, extend the life of cutter, improve mechanical surface finish.

1.4 Good anti-foam, low cost.

1.5 The dilution liquid is non-transparent emulsion, pH value: 8.0~9.0

2. Usage method

   Recommended concentration：

Modular machine tool and machining center: 10%

Grinding machine, lathe, milling machine, drilling machine: 5%-10%

Aluminium alloy machining ：5%~7%      

Preparation method: Dilute with the clean tapping water. Stir evenly. After emulsify

completely then it can be used.

  Preparation requirement: When preparing (replacing) new fluid, should drain out the old

fluid, the sweepings and the greasy dirt, and clean the liquid storage tank and pipeline

thoroughly with the circulating water. (If old fluid has been decayed, It is better to add

disinfectant) clean tank circularly with 1%~2% this diluent, finally prepare the work

 solution and stir evenly. 

Supply the new fluid: When the work solution needs to be supplied, during add water, also should add the corresponding quantity LY-Y303 original fluid in proportion to maintain

the enough density of the fluid.  

3. Notes

The working fluid should maintain clean, ventilated, the machine tool should have the efficient system of filtration and removing dregs, then removing impurities promptly such as iron filings, oil slick and so on. If the machine tool does not start for a long time, should carry on the idle circulation and the oxygenation regularly for the working fluid, detect working fluid density and the pH value regularly, and supply or replace it with the new fluid at the right moment.

4. Storages

Seal it and store under the room temperature, store in dry, cool, the well ventilated storehouse, keep from the sun-scorched and rain-drenched in the storage and transportation. We suggest that the storing temperature is not higher than 40℃.