- Qingdao Love Beings Environmental protection Technology Co., Ltd
- China Manufacturer with main products:Metal cutting Fluid ,Metal cutting oil ,Metal grinding fluid ,Synthetic cutting liquid ,Emulsified cutting liquid ,anti rust oil ,metal degreaser ,zinc phosphate coating ,VCI paper ,Passivation agent , VCI anti rust powder ,knitting machine oil
Home > Products > metal cutting Fluid > No corrosion Aluminum alloys water soluble cutting mahining oil
No corrosion Aluminum alloys water soluble cutting mahining oil
- 100 Ton / Tons per Month
- Qingdao
- T/T L/C Other Cash
- 15 days
- Metal working fluid,Water-soluble cutting fluid,Fully synthetic cutting fluid,
- Fully synthetic cutting fluid, metal working fluid, water-soluble cutting fluid
- GreatAp126 Poly[oxy-1,2-ethanediyl(dimethyliminio)-1,2-ethanediyl(dimethyliminio)-1,2-ethanediylchloride(1:2)]
- 1, 3, 6, 8-PYRENETETRASULFONIC ACID TETRASODIUM SALT 59572-10-0
- Busan 77 cuting fiuld Demulsifier
- Flap wheel - polishing wheel - sanding wheel
Product Details
Type: | water soluble cutting oil |
Product Description
Water-soluble cutting oil
LY-Y303
LY-Y303 water-soluble cutting oil is made by oiliness agent and kinds of compound additives. It has the perfect performance of lubrication, cooling and rust protection. LY-Y303 is suitable for all kinds of cutting and grinding work on ferrous and nonferrous metal. It is a common type of water-soluble cutting oil
1. Characteristics
1.1 Non-toxic, no smell, no stimulation for skin.
1.2 Good performance of E.P., lubrication, cooling, rust protection.
1.3 Improve the processing efficiency , reduce powder consumption, extend the life of cutter, improve mechanical surface finish.
1.4 Good anti-foam, low cost.
1.5 The dilution liquid is non-transparent emulsion, pH value: 8.0~9.0
2. Usage method
Recommended concentration:
Modular machine tool and machining center: 10%
Grinding machine, lathe, milling machine, drilling machine: 5%-10%
Aluminium alloy machining :5%~7%
Preparation method: Dilute with the clean tapping water. Stir evenly. After emulsify
completely then it can be used.
Preparation requirement: When preparing (replacing) new fluid, should drain out the old
fluid, the sweepings and the greasy dirt, and clean the liquid storage tank and pipeline
thoroughly with the circulating water. (If old fluid has been decayed, It is better to add
disinfectant) clean tank circularly with 1%~2% this diluent, finally prepare the work
solution and stir evenly.
Supply the new fluid: When the work solution needs to be supplied, during add water, also should add the corresponding quantity LY-Y303 original fluid in proportion to maintain
the enough density of the fluid.
3. Notes
The working fluid should maintain clean, ventilated, the machine tool should have the efficient system of filtration and removing dregs, then removing impurities promptly such as iron filings, oil slick and so on. If the machine tool does not start for a long time, should carry on the idle circulation and the oxygenation regularly for the working fluid, detect working fluid density and the pH value regularly, and supply or replace it with the new fluid at the right moment.
4. Storages
Seal it and store under the room temperature, store in dry, cool, the well ventilated storehouse, keep from the sun-scorched and rain-drenched in the storage and transportation. We suggest that the storing temperature is not higher than 40℃.
Contact Us
- Qingdao Love Beings Environmental protection Technology Co., Ltd
- Contact nameSophia Jiang
- Phone86-532-84810169-19
- AddressNo. 6, Weidesi Road , Liuting industrial Zone Qingdao,Shandong
metal cutting Fluid | Metal degreaser | Phosphate coatings | Anti rust oil |
VCI anti rust products | knitting oil | Cleaning agent |
- Polishing Wax - Brown - Rough polishing SS304
- Polishing Wax - Green - Fine Polishing SS304
- Semi-synthetic cutting fluid LY-Y304 for CNC machinning lubricate and cooling
- Stainless steel straight cutting oil with best lubrication and poorest cooling
- metalworking cutting fluid, synthetic cutting fluids, water base cutting fluids
- No corrosion Aluminum alloys water soluble cutting mahining oil
- China suppliers High grade extreme pressure water soluble cutting oil for stainless steel mahining
- China suppliers High grade Steel machining antirust water soluble cutting oil
- No harm non-toxic environment friendly Metal grinding Fluid | lubricating, cooling , cleaning , anti rust
- REBOUND CNC plasma cutting machinery with bevel head 30mm
- Taper Hollow Spindle Menegatto
- CAMPLATE 146220-4820 CAMPLATE 2 466 110 110
- CAMPLATE 146220-3220 CAMPLATE 146220-4820
- CAMPLATE 146220-0320 CAMPLATE 146220-0420
- CAMPLATE 1 466 111 361 CAMPLATE 146220-0020
- CAMPLATE 1 466 110 685 CAMPLATE 1 466 111 361
- CAMPLATE 1 466 110 609 CAMPLATE 1 466 110 619
- CAMPLATE 1 466 110 374 CAMPLATE 096230-0500
- CAMPLATE 096230-0260 CAMPLATE 096230-0390
- CAMPLATE 096230-0100 VE cam plate DE650
- VE cam plate 2466110125 VE cam plate DE617
- Common Rail Injector Valve FOOZCO1382 Common Rail Injector Valve FOOZCO1319
- Common Rail Injector Valve FOOZCO1323 Common Rail Injector Valve FOOVCO1505
- Common Rail Injector Valve FOOVCO1520 Common Rail Injector Valve FOOVCO1509
Find Similar Products By Category
- Chemicals > Surface Treatment Chemicals > Cutting Fluid
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Sophia Jiang
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-