USB interactor with pen,portable interactive whiteboard,virtual interactive educational equipment,meeting presentation

Specifications

1. widely applied in teaching
2. low-cost,portable Interactive White Board device,software innovation,multi-media presentation.

Advanced China portable USB interactive board,smart system,virtual interactive educational equipment,meeting presentation

Short focus portable interactive whiteboard is not only designed a new appearance, but also improved the performance. Such as it integrates the video compressed chip to increase the writing speed, One-time calibrating, Multi-writing, which enable the interactive function more portable, simple and use friendly.

Product show: 

Outstanding features:

1. Make any projection surface to be interactive.

2. Small figure, extremely easy to carry.

3. New design,practical use.

4. One-time calibrating with smooth writing

5. USB Cable is about 12m

 

Way to install:

1.Install our software on your PC

2.Connect the projector with PC via VGA cable

3.Connect the signal receiver with PC via UAB cable( or wireless reciver)

4.Start our portable IWB server,calibrate

5.it's finished by click our software to use

Specification:
Dimension (mm)	124 x 70 x 34
Weight (gm)	90
Power Source	Not required, via USB from Computer
Writing Control Method	PIR Method
Resolution	4,000 x 3,000
Data Rate	39 to 60 points/sec
Response Time	0.15 sec
Horizontal Access Angle	40 degree
Vertical Adjusting Range	+50 to -10 degree
Optimized Cursor Jittering	+ / - 2 pixel
Operating Distance	Normal : 1 to 5 Meters
from Screen
	Short Throw : 0.5 to 1 Meter
Connecting to Computer	USB connection, 10M cable
Color	White
Dimension (mm)	200 x 20 x 17
Weight (gm)	23 (46 if battery is included)
Power Source	1.5V “AAA” battery x 2
Pixel Pitch	0.264 x 0.264 mm
Laser	Bandwidth : 650 ùm
Pointer
	Power : 1mW (Class II) or 5mW (Class III)
Connecting to Computer	No need
Color	White

 

Software application: 

 

Portable machine.Connect pc and projector.Common board is OK. The lens of the Main Unit should cover the whole projected board, i.e. the right bounded rectangle. 

You need to see the entire rectangle in the small shaded area.