C/Z purlin rollforming machine

Specifications

The line consist of :

  - Fully automatic CZ, SIGMA section forming machine with thickness 3.2mm

  - Hydraulic de coiler with coil 4 MT coil up

  - Exit table 3 meter x 02sets.

Technical data :

 - Electric components( Touch panel, PLC) : Siemens Gemany / USA / Japan

 - Hydraulic components : Yuken-Japan .

 - Motor power                 : 15Kw/380V/3phase

 - Machine dimension    : L xW x H ( 9m x 1.4m x1.6m)

 - Machine weight           : 10 tons

 - Rollers station              : 16 stations width of coil with gearboxes

 - Gearbox                        : Made in Taiwan

 - Bearings ,chain            : Asahi - Japan

Features :

   - Interconvert automatically levels of speed when stop and start.

   - Fully automatically roll forming  by sprockets and chain transmission .Holes puching , Pre- cut  at any length with pre-

     setting quantity (10 programs).

   - Signal feedback from encoder showing existing length of product and compare with range

   - Rollers made of alloy steel S45C, thermo-hardened and chromium plated get hardness to  50-55HRC.

   - Holes punhing and Cutting dies made of SKD 11 steel. thermo-hardened and chromium plated get hardness to 58 HRC.

   -  Emergency stopping system  to safe user.

   - Before finishing each order  has warning  signal to pre-cutting before the order finished.

   - Hydraulic system equipped with air cooling system to ensure the machine working  constantly

      20 hours /day.

   - A synchronous De-coiler  speed with rolling speed( 0-20 m/min)