Black Green Yellow Red Brown 4" 105X1X16mm 14" 350X3X25.4mm cutting wheel cutting disc for INOX SS

Black Green Yellow Red Brown 4" 105X1X16mm 14" 350X3X25.4mm cutting wheel cutting disc for INOX SS

This product made of corundum or silicon carbide abrasive series, added fiber fabric as strengthen material, with the features of anti-tensile, anti-impact and anti-bend, high cutting efficiencty, safe, maximum speed exceed 80m/s. Applicable to all kinds of steel, stainless steel, iron. Widely used in boilers, construction, machinery manufacturing, and transportation industries.

other size like 4.5" , 5", 7" with 1mm, 1.2mm, 1.6mm, 2mm are available.

  Inner color paper box , or plastic box.

  Outer craft carton, or color carton.

Acoording to grinding and cutting principle, different types of material and condition need to select a different raw material, different binding material, different hardness adn organized number to obtain the best cutting and grinding effieiency. Our company could creat a variety of high- quality abrasive products for your choise.

Large consumption cutting please use the high hardness level of abrasive discs. Conversely, the lower hardnesss.

1. Checking carefully before installation to ensure no damage, voiceless and deformation. No tapping, bending abrasive discs.

2. Abrasive discs installation, use and the equipment should according to the provisions of EN12413.

3. Pay attention to check the flatness of the flange diameter and adjust the shims should meet the safety requirements when installation.

4. Unreinforced abrasive discs flange diameter should be 1/3 bigger than abrasive discs diameter. Reinforced abrasive discs flange diameter should be 1/4 bigger than abrasive discs diameter.

5. Choose matching equipment, shall not be forced to install and change the installation hole. Do not exceed the maximum operating speed which allowed by the abrasive discs.

6. Let the newly installed abrasive discs blank run more tahn 60 seconds before working.

7. During operation, Idlers forbiden in the workspace, the workers should not stand in front of the abrasive discs. It is strictly prohibitied to use both side of reinforced grinding disc proceeding grinding. 

 Abrasive discs should store in place of moisture-proof, sun-proof, horizontal stacked. The height of stacked should less than 1  meter, storage time better is not exceed 1 year.