integrative multivariable DP flow meter with doublt-orifice device

     ACF-1-xxx is the multivariable DP flow meter with the years of sensor technologies accumulation and full concentrations. It is the overall combination of sensor, static-pressure sensor, temperature sensor and flow totalizer, and could constitute the integrate differential pressure flow meter with the cooperation of integrative differential pressure throttling detection device——(such as: V-cone，nozzle, Orificeplate, averaging pilot-tube Annubar etc.); the gauge can display the volume of measured mediums or instantaneous flow and integrated flow of the measured mediums (such as: natural gas, steam, coal gas, compressed air, nitrogen, oxygen, gases or fluids such as water) according to the mathematical model of the mediums. It adopts micro power design, and standby battery is built-in to ensure trade measurement safety, the RS485 communication function and (4-20) mA standard output are provided, the gauge is the revolutionary innovative product in differential pressure flow meter system, and is superior to traditional instruments.

3.Data Sheet



3.1 Display Performance

Parameters Display Digits Units

Differential pressure 5 kPa

Static pressure 5 kPa

Temperature 5 ℃ and K

Instantaneous flow 6 Nm3/h, Sm3/h and kg/h

Accumulated flow 6 m3, T, kg and L

Heat 9 J



3.2 Working Power:



External power supply: (7-30) VDC, working current is less than 40mA

Built-in battery: 3.6V industrial lithium-based automatic switch power supply, when external power is not available, the battery can work for about 2 years continuously.

3.3 Measurement Range and Accuracy of Sensor

Type Optional Measuring Range Measurement Accuracy Remarks

Differential pressure range 0-1.5-7-35-180-600 (kPa) 0.1%FS and 0.2%FS Depends on working conditions and throttling elements

Static pressure range 0-2.5-6.4-10-16-25-32 （Mpa） 0.2%FS Depends on working conditions and throttling elements

Temperature pressure range -50℃ ~ 400℃ 0.3%FS 3-wire system pt100 sensor



Output Signal and Communication Interface

a. RS485 communication interface standard, MODBUS protocol can support 255 devices at most.

b. 4-20 (mA) standard current signal output, the output accuracy is 0.2%FS



Ambient Temperature: ：-30℃ - +70℃

Relative Humidity: 5%-95%

Atmospheric Pressure: 70-106kPa

Explosive-proof Grade: EXDIICT6

We are a measurement instruments manufacturer from China, we produces kinds of measurement instruments, such as pressure gauge, pressure transmitter, temperature gauge, temperature transmitter, level meter, level transmitter, level meter switch, pressure gauge switch, temperature gauge switch, flow meter, flow transmitter, integrative multivariable flow transmitter, wireless instruments network,etc. All instruments are used for industrial measurement.