Terminal Block UK5 Fuse Type(plastic Terminal Block)

Specifications

Terminal Block UK5 Fuse Type
test terminal block UK series,
Wire range:0.2-2.5mm2/24-16awg
Rated voltage:800V 600V 600V

Terminal Block UK5 Fuse Type

Rated Current:6.3A

Rated voltage:800V

4mm

Out Dimension:  72.5/8.2/56

1> Sectional area of conductors applicable for heavy current terminal is 16-150mm2 .

2> Bottom surface of wire clamp of terminal is of prism shape , this guarantees alignment

of three points of conductor.

3>Bottom surface of wire clamp bears groove ,this guarantees low value transition on contact

surface after wiring .

4>It makes use of elastic link to realize self locking of screw ,This kinds of terminal is equipped with

enclosed insulation housing that is made of nylon PA.66 and is made up of two parts .marking use of

locking secondary spring of terminal, it is able to install the terminal on guide rails conforming to TH35-7.5 or mounting rails that are in accordance with G32-18 and G32-15 L.

Complying with IEC60947-1, GB14048 standards, our terminal blocks are widely used in the circuit of AC 50Hz (60Hz), rated voltage 660V, DC 440V and below, rated sectional area 0.75~150mm2 connection conductor. It's also suitable for connecting the circle copper conductor of terminal that is not specially processed of pressure welding.

Product Feature
Reasonable installation structure design, wide general-purpose nature, used on both G type an TH type DIN rail. If under 50mm2, it adpots fasten accessory installation.

Small size, complete set of specification, big connected conductor sectional area and good electrical conductivity. The one that is below 50 mm2 adopts copper press line frame and copper fasten screw and others adopt copper press line frame and steel screw and copper skirt plate. It has large tightening torque and self-locking function.

Connector Hard Wire(mm2) Soft Wire(mm2) Rated Current/ Voltage
UK2.5B 0.2-4 0.2-2.5 32A/690VAC
UK3N 0.2-4 0.2-2.5 32A/800VAC
UK5N 0.2-6 0.2-4 5 41A/800VAC
UK6N 0.2-10 0.2-2.5 57A/800VAC
UK10N 0.5-16 0.5-10 76A/800VAC
UK16N 2.5-25 4-16 101A/800VAC
UK35N 0.75-50 0.75-35 150A/1000VAC
UKH50 16-50 25-50 150A/1000VAC
UKH95 25-95 35-95 232A/1000VAC
UKH150 35-150 50-150 309A/1000VAC

USLKG2.5 0.2-4 0.2-2.5 32A
USLKG3 0.2-4 0.2-2.5 32A
USLKG5 0.2-6 0.2-4 41A
USLKG6N 0.2-10 0.2-6 57A
USLKG10N 0.5-16 0.5-10 76A
USLKG16N 2.5-25 4-16 101A
USLKG35N 0.75-50 0.75-35 150A
USLKG50 16-50 25-50 150A

Connector Hard wire(mm) 2
Soft wire(mm) 2

Rated Current

Rated voltage
Dimensions

UK2.5B
0.2-4 0.2-2.5 32A
690VAC
6.2× 42.5× 42
UK3N 0.2-4 0.2-2.5 32A 800VAC 6.2× 42.5× 42
UK5N 0.2-6 0.2-4 41A 800VAC 6.2× 42.5× 42
UK6N 0.2-10 0.2-2.5 57A 800VAC 6.2× 42.5× 47
UK10N 0.5-16 0.5-10 76A 800VAC 10.2× 42.5× 47
UK16N 0.2-25 4-16 101A 800VAC 12.2× 42.5× 54
UK35N 0.75-50 0.75 150A 1000VAC 15.2× 50.0× 62
UKH50 16-50 25-50 150A 1000VAC 20× 70.5× 83.5
UKH95 25-95 35-95 232A 1000VAC 25× 83× 97.5
UKH150 35-150 50-150 309A 1000VAC 31× 100× 118.5