Spiral Vane Flow Indicator Elettrotec CFV5B N Visual Pipeline Flow Display Equipment
Product Spotlights
Product Introduction
CFV propeller-type flow indicators are typically used to monitor the proper flow and circulation of fluids in pipelines. They are a suitable choice for cooling and heating circuits, lubrication equipment, water treatment, photographic processing equipment, chemical processing, food and beverage, and plastic processing equipment. Elettrotec flow switches and indicators are typically used to monitor the flow of fluids or gases in circuits. They allow for easy reading of flow values or, when equipped with contacts, send an electronic alarm signal to a remote control panel when the flow falls below a preset value. When a liquid or gas is held in an upright position, it flows from the bottom to the top of the device, pushing the shutter along a guide tube with a variable cross-sectional area and positioning it at a flow rate that can be read on the scale marked by red graduations on the glass tube. This allows for the reading of the instantaneous flow rate in the circuit. The shutter, immersed in the liquid, moves freely without mechanical friction and, due to the magnetic field generated by an internal magnet, operates the electrical alarm contacts. Using a movable cursor with reference marks, the contact can be positioned according to the flow rate to be measured, as indicated on the side label. The cursor’s position is locked by turning the set screw located below the connector. Use with contaminant-free liquids
Performance Features
Vertical installation, fluid inlet facing upward
Frictionless moving parts, high operational reliability
Intervention point adjustable to any value on the scale
Exceptionally robust construction
Unaffected by fluid pressure
Selection Guide
Product Structure and Details
The electrically adjustable flow switch with visual indication features a robust body, two connecting flanges, a shutter with a permanent magnet, a graduated Pyrex tube, a shutter guide tube with a variable flow zone, seals, a cursor with magnetic contacts, and an electrical connector.
Technical Specifications
Country of Origin: Italy
Body Material: Nickel-plated brass
Main Impeller: Red
Seal Material: Nitrile rubber
Flow Rate Range: 6 to 60 liters/minute
Max. Flow Rate (Water): 60 liters/minute
Max. Pressure: 20 bar
Operating Temperature: 90 ℃
Thread: 1 inch
Mounting: Any orientation
Tube Material: Pyrex glass
Viscosity: 250 cSt.
Weight: 0.572 kg
Product Dimensions
Product Applications
Cooling and heating circuits, lubrication equipment, water treatment, photographic processing equipment, chemical industry, food and beverage, and plastic processing equipment
Send Inquiry to This Supplier
You May Also Like
-
Auto Flow VA 420 Insertion Type Flow Meter Industrial Pipeline Flow Measurement TransducerNegotiableMOQ: 1 Piece
-
Auto Flow AMF6012 Gas Flow Meter Precise Industrial Gas Flow Measuring Control EquipmentNegotiableMOQ: 1 Piece
-
Tangential Vane Type Flow Meter Auto Flow CHT Industrial Liquid Volumetric Measuring ApparatusNegotiableMOQ: 1 Piece
-
Auto Flow AMF5003 Mass Flow Meter High‑precision Gas Liquid Flow Measuring TransmitterNegotiableMOQ: 1 Piece
-
Pro‑M Magnetic Flow Meter VorTek Corrosion‑Resistant Liquid Measuring TransmitterNegotiableMOQ: 1 Piece
-
E+H Ultrasonic Clamp-On Flow Meter 9W4BA0-AALHFNDAEAABABA2NegotiableMOQ: 1 Piece
-
E+H Flowfit CPA25 Flow ComponentNegotiableMOQ: 1 Piece
-
E+H Electromagnetic Flowmeter Proline Promag H 100NegotiableMOQ: 1 Piece
-
E+H Vortex Flow Meter Proline Prowirl F 200NegotiableMOQ: 1 Piece
-
E+H Flow Meter FLSE100-M 35SSTINegotiableMOQ: 1 Piece

