Fire Bell Fire Horn Fire Sounder Loud Sound Alarm Fire Evacuation Security System

Fire Alarm Bell Wire Connection with any brand Conventional 2 wire non-polarized fire alarm control panel. Fire alarm bell will be triggered by smoke detector, heat detector, manual call point for first time fire alarm. 

Fire alarm bell or fire sound light alarm device should be installed at every floor of building to alert people of fire. 

The bell remains the most commonly used alarm for fire evacuation system, for wall applications, indoors. They are designed to be used in 24 volt DC systems.

Specifications

Voltage ranges: 20vdc to 28vdc (Nonpolarity)

Power and current consumption: 1W, 38ma@24vdc(maximum)

Number of standard: EN54-3

Sound level：80dB（A）@1M (minimum)

Service Use: Fire alarm, general signaling, burglar alarm

Environment type: Type A (indoor)

Input terminal Wire Gauge: 0.28 mm2 to 1.5 mm2

Operating Temp.: -10℃ to +55℃

Operating Humidity Range: 10% to 93% Relative Humidity ( Non-condensing)

Material of cover: Aluminum

Dimension: 150mm×50mm（D*H) (Without bracket)

Weight: Net Weight 342g, Gross Weight 395g

Download fire alarm system instruction and manual at fire alarms

Wiring

The system designer must make sure that the total current drawn by the devices on the loop does not exceed the current capability of the panel supply, and that the last device on the circuit is operated within its rated voltage.

When calculating the voltage available to the last device, it is necessary to consider the voltage drop due to the resistance of the wire. The thicker the wire, the smaller the voltage drops. Wire resistance tables can be obtained from electrical handbooks.