Contact Platform Support
Help CenterHandheld Leaf Wetness Tester, 0~100%, RS485 Interface
Related Products
-
LWS-10 Leaf Wetness Sensor，SDI-12 Interface，0~100%US$ 150 - 300MOQ: 1 Piece -
LWS-10 Leaf Wetness Sensor，RS485，0-2V，4-20mAUS$ 130 - 260MOQ: 1 Piece
-
CO2 Carbon Dioxide Sensor Transmitter, RS485 Modbus，Voltage 0-2V，Current 4-20mAUS$ 160 - 260MOQ: 1 Piece
-
ISO20957-1 Figure 1 Test Finger Φ9.5mmUS$ 110 - 170MOQ: 1 Piece
-
IEC 62368-1 Figure 47 Steel Disc for Temperature Rise TestUS$ 180 - 240MOQ: 1 Piece
Handheld Leaf Wetness tester, RS485 Interface
Meter：
The FieldScan Series – MultiSense is a handheld readout device for use with our soil moisture sensors and environmental monitoring sensors made or sold. It interfaces with sensor with digital signal to obtain instantaneous results. This manual covers all MultiSense functions and capabilities.
Senser
LWS10 measures leaf wetness. It sealed with resin packaged plastic body can be used for long time monitor. Wetness measurement value is proportional to the percentage of sensing area covered with water. The sensor is applicable for science research, bacteria prevention, foliage dressing spraying, greenhouse, smart agriculture etc.
| Specifications | |||
| Output Interface | Analog Voltage 0-2V (Output resistance ~0ohm) | Analog Current 4-20mA (Load Resistor<500ohm) | RS485 Modbus-RTU |
| Power Supply | 3.6-30V/DC | 12-30V/DC | 3.6-30V/DC |
| Power Consumption | 6mA@24V DC | 30mA@24V DC (with 20mA output signal) | 6mA@24V DC |
| Leaf wetness Measurement | Range: 0-100%, Resolution: 0.1%, Accuracy:5% | ||
| Temperature Compensation | Range: -40~80℃, Resolution:0.1℃, Accuracy:±0.5℃ | ||
| Measurement Technique | FDR | ||
| IP Ratings | IP68 | ||
| Operating Temperature | -40~85℃ | ||
| Sensor Sealed | Epoxy resin | ||
| Installation | Mounting kit | ||
| Cable Length | 2 meters or Customize | ||
| Dimension | 65*13*145mm | ||
| Parameters | Code | Comments |
| Code 1: Product Series | LWS10 | LWS10 leaf wetness and temperature Sensor |
| Code 2: Output Interface | A B C D E F G | Analog Voltage 0-2V Analog Current 4-20mA RS485,Modbus-RTU RS485,Modbus-RTU & Analog Voltage 0-2V RS485,Modbus-RTU & Analog Current 4-20mA SDI-12 (not available for now) Customize |
| Code 3: Power Supply | A B C D E | 3.6-30V DC (not applicable for 4-20mA output) 12-30V DC 2.7-16V DC (not available for now) Customize 2.0-5.5V DC (not available for now) |
| Code 4: Cable Length | 002 XXX | 2 meters Customize, XXX is required cable length(Unit: meter) |
| Ordering Code Example: Leaf wetness and temperature sensor, Output Interface RS485 Modbus RTU, Power Supply 3.6-30V DC, Cable Length 5 meters. Ordering Code is : LWS10 – C A 005 | ||
Send Inquiry to This Supplier
You May Also Like
-
IEC62368-1 Figure 48 Aluminium Ring With K Type ThermocoupleUS$ 180 - 240MOQ: 1 Piece
-
IEC 62368-1 Figure 49 Aluminium Foil With J Type ThermocoupleUS$ 180 - 240MOQ: 1 Piece
-
IEC 62368-1 Annex T Steel Sphere 50 mm Diameter & 500 g MassUS$ 83 - 100MOQ: 1 Piece
-
IEC 62133-1:2017 Battery Ingestion Gauge for Figure 2US$ 150 - 200MOQ: 1 Piece
-
IEC 60598-1:2020 Luminaires Test Chain for Figure 29 63% Cu/37% ZnUS$ 280 - 350MOQ: 1 Piece
-
BS1363-2 Test Pin With Force 5N for Figure 1US$ 228 - 250MOQ: 1 Piece
-
Water Spray Test Spray Head IEC 62368-1:2023 Figure Y.3US$ 160 - 180MOQ: 1 Piece
-
Aluminium Vessel for Drop Test of IEC 60335-2-3 21.102US$ 290 - 320MOQ: 1 Piece
-
IEC 62368-1 Clause 9.6.2 Wireless Charging Foreign Object Test KitUS$ 1680 - 1880MOQ: 1 Piece
-
Cold Bend Test Apparatus IEC 60811-1-4 Figure 1US$ 1500 - 1700MOQ: 1 Piece
