YFX-800/80 Hengyang Heavy Industry Electric Hydraulic Windproof Iron Wedge Brake Display Working Status

Jiaozuo Hengyang Heavy Industry Brake Co., Ltd. is a modern professional enterprise integrating research, development, design, manufacturing, sales and service of electric hydraulic brake, thruster, electromagnetic brake and lifting appliances. Main products: electric hydraulic brakes, electric hydraulic thrusters, electromagnetic, hydraulic, pneumatic, failure protection brakes, arm disc brakes, pneumatic caliper disc brakes, electromagnet brakes, various hydraulic wheel edges, windproof iron wedge brakes, which have passed the ISO9001 quality management system certification. Our factory has a superb technical team, advanced production equipment, scientific management level Strict testing methods and excellent after-sales service serve several large and small enterprises in China. Involving industries such as mining, machinery, metallurgy, lifting, electricity, railways, water conservancy, ports, chemical engineering, etc., with the aim of putting quality first and customers first, we sincerely cooperate with friends from all walks of life to seek development with high-quality products, favorable prices, and the most thoughtful services.

Drum braking, also known as block braking, is achieved by pressing the brake pads onto the brake wheels. Drum brake is an early designed braking system, and its brake drum design was already used on carriages in 1902. It was not until around 1920 that it began to be widely used in the automotive industry. The mainstream of drum brakes is the internal tension type, where the brake pads (brake shoes) are located on the inner side of the brake wheel. When braking, the brake pads open outward and rub against the inner side of the brake wheel to achieve the purpose of braking. Compared with the disk brake, the heat dissipation of the drum brake is much worse. The stability of the brake force of the drum brake is poor. The brake force varies greatly on different roads, and it is not easy to control. Due to poor heat dissipation performance, a large amount of heat will accumulate during the braking process. The brake pads and wheel drums are prone to extremely complex deformation under the influence of high temperatures, which can lead to brake decay and vibration, leading to a decrease in braking efficiency. In addition, after using the drum brake for a period of time, it is necessary to regularly adjust the gap between the brake shoes, and even remove the entire brake drum to clean the accumulated brake powder. Of course, drum brakes are not useless either. They are cheap in cost, have high braking force, and conform to traditional design. During the braking process of a four-wheel sedan, due to inertia, the load on the front wheels usually accounts for 70% -80% of the total load of the car. The braking force on the front wheels is greater than that on the rear wheels, and the rear wheels play an auxiliary braking role. Therefore, in order to save costs, car manufacturers adopt a braking method of front disc and rear drum. However, for heavy vehicles, because the speed is generally not very high, the durability of brake shoes is also higher than that of disc brakes, and the braking force is large, many heavy vehicles still use the four-wheel drum design.