Contact Platform Support
Help CenterHengyang Heavy Industry MW500-2500 Electromagnetic Drum Brake Noisy
Related Products
-
Hengyang Heavy Industry MW630-5000 Electromagnetic Drum Brake With Lifting HookCNY 1500 - 4000MOQ: 5 Units -
Hengyang Heavy Industry's MW710-8000 Electromagnetic Drum Brake is Easy to MaintainCNY 1500 - 4000MOQ: 5 Units
-
Hengyang Heavy Industry MW800-10000 Electromagnetic Drum Brake With CCC CertificateCNY 1500 - 4000MOQ: 5 Units
-
MW160-80 Electromagnetic Drum Brake Hengyang Heavy Industry Green and Environmental ProtectionCNY 1500 - 4000MOQ: 5 Units
-
MW200-160 Electromagnetic Drum Brake Hengyang Heavy Industry Has Explosion-proof BrakeCNY 1500 - 4000MOQ: 5 Units
Maintenance methods for electromagnetic brakes
In order to ensure the uninterrupted operation of the electromagnetic brake, it is necessary to regularly maintain and maintain it:
1. Frequently add lubricant to the movable part of the electromagnetic brake.
2. Regularly check the length of the armature stroke. Because during the operation of the brake, the travel length of the armature will increase due to wear on the moving surface. When the length of the armature stroke cannot reach the normal value, adjustments must be made to restore the minimum clearance between the braking surface and the rotary table. If the stroke length of the armature increases above the normal value, it may greatly reduce the suction force.
3. If a worn brake surface is replaced, the minimum clearance between the brake surface and the rotary table should be adjusted appropriately.
4. Regularly check the tightness of the bolts, especially tightening the bolts of the electromagnet, the bolts of the electromagnet and the shell, the bolts of the magnetic yoke, the bolts of the electromagnet coil, and the wiring bolts.
5. Regularly inspect the mechanical wear of movable components and remove dust, burrs, and dirt from the surface of electromagnetic components
The brake for cranes consists of brake pads, brake arms, brake wheels, and brake release devices. The brake wheel is often installed as a half body of the coupling on the rotating shaft of the mechanism. The symmetrically arranged brake arm is hinged with the fixed part of the frame, and the two brake pads with friction materials on the inner side are movable and hinged on the two brake arms. Under the action of the brake force on the brake release device, the paired brake pads compress the brake wheel radially and generate braking torque.
Send Inquiry to This Supplier
You May Also Like
-
MW250-315 Electromagnetic Drum Brake Hengyang Heavy Industry Asbestos Free LinerCNY 1500 - 4000MOQ: 5 Units
-
MW315-630 Electromagnetic Drum Brake Constant Yang Heavy Industry Equal Retraction DeviceCNY 1500 - 4000MOQ: 5 Units
-
MW400-1250 Electromagnetic Drum Brake With High Frequency of Action by Hengyang Heavy IndustryCNY 1500 - 4000MOQ: 5 Units
-
MW500-2500 Electromagnetic Drum Brake Hengyang Heavy Industry Energy Saving and Stable BrakingCNY 1500 - 4000MOQ: 5 Units
-
MW630-5000 Electromagnetic Drum Brake Hengyang Heavy Industry NoisyCNY 1500 - 4000MOQ: 5 Units
-
MW710-8000 Electromagnetic Drum Brake, Easy Maintenance by Hengyang Heavy IndustryCNY 1500 - 4000MOQ: 5 Units
-
MW800-10000 Electromagnetic Drum Brake, Easy Maintenance by Hengyang Heavy IndustryCNY 1500 - 4000MOQ: 5 Units
-
Hengyang Heavy Industry's Electromagnetic Drum Brake MW160-80 is Safe and Reliable to UseCNY 1500 - 4000MOQ: 5 Units
-
Hengyang Heavy Industry Electromagnetic Drum Brake MW200-160 Asbestos Free BrakingCNY 1500 - 4000MOQ: 5 Units
-
Hengyang Heavy Industry Electromagnetic Drum Brake MW250-315 With Lifting HookCNY 1500 - 4000MOQ: 5 Units
