Contact Platform Support
Help CenterGerman Technical Background VOK-100 Wax Dispersion It Can Improve the Directional Effect of Effect Pigments Replaces BYK-100
Related Products
-
German Technical Background VOK-103 Wax Dispersion It Can Prevent Settlement in the Tank Replaces BYK-103CNY 90 - 110MOQ: 25 Kilograms -
German Technical Background VOK-106 Wax Dispersion It Can Improve the Orientation of Effect Pigments Replaces BYK-106CNY 90 - 110MOQ: 25 Kilograms
-
German Technical Background VOK-110 Wax Dispersion It is Used to Reduce the Tendency of Pigment Settling Replaces BYK-110CNY 90 - 110MOQ: 25 Kilograms
-
German Technical Background VOK-116 Wax Dispersion This Additive Reduces Dust Adsorption and Improves Anti-sticking Properties Replaces BYK-116CNY 90 - 110MOQ: 25 Kilograms
-
German Technical Background VOK-127 N Wax Dispersion Used to Improve the Surface Properties of Solventborne Coil Coatings and Architectural Coatings Replaces BYK-127 NCNY 90 - 110MOQ: 25 Kilograms
German technical background VOK®-AP 100 wax dispersion
Dispersion of VOK®-AP 100 ethylene vinyl acetate copolymer wax for solventborne effect coating systems; Improve the directional effect of the effect pigment and reduce the settlement in the tank.
Product Information
Chemical composition
Dispersion of vinyl acetate copolymer wax.
Typical materialized data
The data presented on this data page are typical values only and are not technical indicators of the product.
Non-volatile: 10 %
Carrier: 1/1 xylene, butyl acetate
Melting point (wax composition): 105 °C
Fineness: 25 μm
Viscosity (23 °C): 13 mPa·s
To find out the food contact regulatory status for this product, please contact our Product Safety Department or visit the website:
Storage and transportation
The product is temperature sensitive. Store and transport below 35°C, stir well before use.
Special reminder
Granulation test method: disperse the wax additive at 4 m/s for 5 min, then add 20% butyl acetate, keep 4 m/s stirring for 2 min, and scrape the plate on the glass plate with a 100 um film coater. The coating film drying process should be transparent and free of particles.
Fineness test method: scraper fineness meter, ISO1524, disperse the wax additive at 4 m/s for 5 minutes, test with 50 um scraper fineness meter, fineness: 25 um.
Application areas
Coatings industry
Features and benefits
The additive can improve the directional arrangement of effect pigments such as aluminum powder and pearlescent powder, and improve the effect of heterochromic light at angle; Reduction of short-wave defects (piebald, Bernard vortex), improved leveling of the next varnish overhead; Prevents settling in the tank.
Recommended use
VOK®-AP 100 is recommended for solventborne primers and single-coat metallic industrial topcoats.
Recommended dosage
The 30% additive dosage (purchased form) is based on solid resin. The above recommended addition amount is for reference, and the suitable addition amount needs to be determined by a series of tests
Incorporation method and processing guidance
The additive is best added at a low shear rate at the end of production, stirring well before use, dispersing the wax additive at 4 m/s, and adding the resin solution under stirring. In the CAB-containing system, the CAB solution should be dispersed evenly with the resin solution at high speed (> 5 m/s), and then the stirred wax slurry should be added. Pigment paste and solvent should be added under stirring.
Send Inquiry to This Supplier
You May Also Like
-
German Technical Background VOK-131 Wax Dispersion It Can Improve the Surface Slip of Solvent-based Furniture and Floor Varnishes Replaces BYK-131CNY 90 - 110MOQ: 25 Kilograms
-
German Technical Background VOK-140 N Wax Dispersion Used in Solventborne Can Coatings to Improve Surface Slip and Scratch Resistance Replaces BYK-140 NCNY 90 - 110MOQ: 25 Kilograms
-
German Technical Background VOK-184 Wax Dispersion It Can Improve the Surface Properties of Solventborne Can Coatings Replaces BYK-184CNY 90 - 110MOQ: 25 Kilograms
-
German Technical Background VOK-913 Wax Auxiliaries For Solventborne and Aqueous Systems Replaces BYK-913CNY 90 - 110MOQ: 25 Kilograms
-
German Technical Background VOK-914 Wax Auxiliaries For Solventborne and Aqueous Systems Replaces BYK-914CNY 90 - 110MOQ: 25 Kilograms
-
German Technical Background VOK-915 Wax Auxiliaries The Additive is Used in Industrial Coatings Replaces BYK-915CNY 90 - 110MOQ: 25 Kilograms
-
German Technical Background VOK-916 Wax Auxiliaries Can be Used in Solventborne and Aqueous Systems Replaces BYK-916CNY 90 - 110MOQ: 25 Kilograms
-
German Technical Background VOK-920 Wax Auxiliaries Used in UV-curable Powder Coating Systems Replaces BYK-920CNY 90 - 110MOQ: 25 Kilograms
-
German Technical Background VOK-940 Wax Auxiliaries It Can Improve the Surface Slip of Printing Inks Replaces BYK-940CNY 90 - 110MOQ: 25 Kilograms
-
German Technical Background VOK-950 Wax Auxiliaries For Solventborne and Solvent-free Coating Systems Replaces BYK-950CNY 90 - 110MOQ: 25 Kilograms
