German technical background VOK-1610 Defoamer It can be used for various water-based lotion adhesives replaces BYK-1610

German technical background VOK ®- DF 1610 Defoamer

Product Information

Chemical composition

Hydrophobic particles, emulsifiers and lotion of foam breaking polysiloxane

Typical Physicochemical Data

The data given in this data page are only typical values, not technical indicators of the product.

Density (20 ° C): 1.01 g/ml

Non volatile matter (10 min, 150 ° C): 17%

Carrier: water

Storage and transportation

Store and transport between 0-40 ° C. Temperature sensitive lotion. If the temperature exceeds or falls below the recommended range, the product must be tested before use, and re emulsified at room temperature if necessary.

Application field

Coating industry

Product features and advantages

VOK ®- DF 1610 is a silicone defoamer that can replace mineral oil defoamer in a variety of applications (latex paint, gypsum, high gloss and semi gloss paint).

PVC (pigment volume concentration) is used between 35-70.

Recommended dosage

0.1-0.5% of auxiliary dosage (supply form) is based on the general formula, and the dosage can reach 0.8% under special circumstances.

The above recommended dosage is for reference, and the appropriate dosage shall be determined through a series of tests.

Adding method and processing guidance

Generally, 2/3 of the amount of the defoamer is added to the abrasive, and 1/3 of the amount is added to the paint mixing process or finished paint.

an adhesive

Product features and advantages

VOK ®- DF 1610 ratio VOK ®- DF 1615 is more effective and can be used as defoamer for various water-based lotion adhesives. Recommended dosage: 0.05-0.5% Additive dosage (supply form) is based on the general formula.

The above recommended dosage is for reference, and the appropriate dosage shall be determined through a series of tests.

Adding method and processing guidance

The additive can be added at any time in the production process under low to medium shear force.