Corrosion of lubricating Oil Tester
Product Model: JF391
Product Introduction
It is suitable for measuring the corrosion degree of engine lubricating oil. The principle is that only the test piece is in contact with the sample, and after 50 hours of testing at a certain temperature, the corrosion degree of the sample is determined according to the weight change of the metal test piece.
Technical Parameter
1. Applicable standard: GB/T391
2. Heating method: electric heating tube heating
3. Temperature control accuracy: ±0.1℃
4. Stirring method: mechanical stirring
5. Temperature control method: digital display PID temperature controller
6. Temperature control range: normal temperature ~ 140 ℃
7. Timing method: digital display timing
8. Working unit: 4 tubes
9. Working power supply: AC220V/50HZ
Main Feature
1. 4 standard lead sheets 20×45×1.5mm;
2. Digital display of microcomputer temperature controller, accuracy 0.1℃, PT100 sensor;
3. 4 standard glass test tubes 270×30mm;
4. Microcomputer timer, digital display, with wind alarm;
5. Oil bath heating, liquid level protection and overheating;
6. Mechanical stirring device to reduce the error of manual intervention;
7. Stainless steel heater, stainless steel bath body.
Send Inquiry to This Supplier
You May Also Like
-
ASTM D4310 Inhibited Mineral Oils Sludging and Corrosion Tendencies TesterUS$ 8200 - 8300MOQ: 1 Piece
-
Water Separability of Petroleum Oils TesterUS$ 7800 - 7900MOQ: 1 Piece
-
ASTM E659 Autoignition Temperature of Liquid Chemicals TesterUS$ 5400 - 5500MOQ: 1 Piece
-
ASTM D6743 Thermal Stability of Organic Heat Transfer Fluids TesterUS$ 6300 - 6400MOQ: 1 Piece
-
ASTM D1092 Lubricating Grease Apparent Viscosity TesterUS$ 27200 - 27300MOQ: 1 Piece
-
ASTM D1092 Lubricating Grease Apparent Viscosity TesterUS$ 27200 - 27300MOQ: 1 Piece
-
ASTM D1742 Oil Separation From Lubricating Grease During Storage TesterUS$ 7200 - 7300MOQ: 1 Piece
-
ASTM D4693 Automobile Hub Bearing Low Temperature Torque of Grease TesterUS$ 24500 - 25200MOQ: 1 Piece
-
Lubricating Oil Antioxidant Stability TesterUS$ 6000 - 6900MOQ: 1 Piece
-
Aviation Hydraulic Oil Thermal Oxidation Stability and Corrosion TesterUS$ 3000 - 3500MOQ: 1 Piece
