Module spare parts 1747-L553

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules / cards, controllers, touch screens, servo drivers.

Advantages: supply of imported original products, professional production parts,

Fast delivery, accurate delivery time,

The main brands include ABB Bailey, Ge / fuanc, Foxboro, Invensys Triconex, Bently, A-B Rockwell, Emerson, ovation, Motorola, xyvom, Honeywell, Rexroth, KUKA, Ni, Deif, Yokogawa, Woodward, Ryan, Schneider, Yaskawa, Moog, prosoft and other brands

Battery error Medium4 Battery power is not available due to one of the following issues: • Battery charge failed • Battery failed • Battery missing • Battery not connected • Battery connection is reversed • Power system selftest failed • Battery is degraded • Battery current was too high while the power switch was off Battery power is not available. Ventilation will stop if main power supply is lost. • Contact an authorized service representative. No battery power is detected due to one of the following issues: • Power system communication error • The battery is not charging properly No battery power detected. Ventilation may stop if main power supply is lost. • Contact an authorized service representative. Battery in use Medium4 The system has been powered by internal battery for more than 3 seconds. Main power supply is not available. The ventilator is powered by the battery. • Connect to main power supply. Mains power is unavailable and the remaining internal battery time is less than 30 minutes. Main power supply is not available. The ventilator is powered by the battery. • Connect to main power supply. Batteries are discharging while the ventilator is plugged in. Main power supply is not available. The ventilator is powered by the battery. • Check main power supply connections. Circuit leak High Measured leak is greater than the set Leak limit while the patient is connected. Leak % is greater than the set Leak Limit. • Check for leaks in the patient circuit or airway. • Review the Leak Limit setting in Alarm Setup. • Clean or replace the expiratory flow sensor. Circuit leak alarm off Medium4 Leak Limit is set to Off. Leak Limit is set to Off. • Review the Leak Limit setting in Alarm Setup.