Contact Platform Support
Help CenterModule Spare Parts 1756-IF16
Related Products
Focus on DCS, PLC, robot control system and large servo system.
Main products: various modules / cards, controllers, touch screens, servo drivers.
Advantages: supply of imported original products, professional production parts,
Fast delivery, accurate delivery time,
The main brands include ABB Bailey, Ge / fuanc, Foxboro, Invensys Triconex, Bently, A-B Rockwell, Emerson, ovation, Motorola, xyvom, Honeywell, Rexroth, KUKA, Ni, Deif, Yokogawa, Woodward, Ryan, Schneider, Yaskawa, Moog, prosoft and other brands
| 1756-IF16 |
Another procedure or condition prevented the FRC series measurement from starting within the last 5 seconds. The FiO2 setting was changed between FRC measurements. At least a 10% difference must be maintained between the FiO2 setting and the FRC O2 setting to measure FRC. • Set FRC O2 to be a minimum of 10% higher or lower than the FiO2 setting, and then start the FRC series. • Set FiO2 to be a minimum of 10% higher or lower than the FRC O2 setting, and then start the FRC series. Hard keys or trim knob error High Key pad failed to communicate for greater than 10 seconds. The system detected a hard key or Trim Knob error. • Cycle power. • Contact an authorized service representative. Inspiratory flow sensor error High4 Total flow sensor communications failed. The ventilator is not receiving data from the total flow sensor. Flow and volume measurements may not be available. • Contact an authorized service representative. Medium4 Air Flow sensor communications failed. The ventilator is not receiving data from the Air flow sensor. The delivered FiO2 may not match the set FiO2. • Contact an authorized service representative. O2 Flow sensor communications failed. The ventilator is not receiving data from the O2 flow sensor. The delivered FiO2 may not match the set FiO2. • Contact an authorized service representative. Inspiratory temperature sensor error Low Air temperature sensor failed during a nonventilation state. The ventilator is not able to measure air flow temperature. The delivered FiO2 may not match the set FiO2. • Set FiO2 to 100%. O2 temperature sensor failed during a nonventilation state. The ventilator is not able to measure O2 flow temperature. The delivered FiO2 may not match the set FiO2. • Contact an authorized service representative. Total flow temperature sensor failed during a non-ventilation state. The ventilator is not able to measure total flow temperature. • Contact an authorized service representative
Send Inquiry to This Supplier
You May Also Like
-
Module Spare Parts 9662-610 3000520-390C1RUS$ 1 - 100000MOQ: 1 Piece -
Module Spare Parts T8110C BUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts T8151BUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts T8231US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts T8310US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts T8431CUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts T8830US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts T9110US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts T9402US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts T9432US$ 1 - 100000MOQ: 1 Piece
