Contact Platform Support
Help CenterModule Spare Parts 1756-RM A
Related Products
-
Module Spare Parts 1786-RPFPXLBUS$ 1 - 100000MOQ: 1 Piece -
Module Spare Parts 1794-ASBUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts9300 9852 9802US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 9300 9852 9852US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 9662-610 3000520-390C1RUS$ 1 - 100000MOQ: 1 Piece
Focus on DCS, PLC, robot control system and large servo system.
Main products: various modules / cards, controllers, touch screens, servo drivers.
Advantages: supply of imported original products, professional production parts,
Fast delivery, accurate delivery time,
The main brands include ABB Bailey, Ge / fuanc, Foxboro, Invensys Triconex, Bently, A-B Rockwell, Emerson, ovation, Motorola, xyvom, Honeywell, Rexroth, KUKA, Ni, Deif, Yokogawa, Woodward, Ryan, Schneider, Yaskawa, Moog, prosoft and other brands
| 1756-RM A |
MVexp high High Measured expired minute volume is greater than the MVexp high alarm limit. Expired minute volume is greater than the high alarm limit. • Check the status of the patient. • Review the ventilator settings. • Review the MVexp high alarm limit in Alarm Setup. MVexp low High1, 2 Measured expired minute volume is less than the MVexp low alarm limit while the patient is connected. Expired minute volume is less than the low alarm limit. • Check the status of the patient. • Check for leaks in the patient circuit or airway. • Review the ventilator settings. • Review the MVexp low alarm limit in Alarm Setup. MVexp low alarm off Medium4 MVexp low alarm selection is Off. MVexp low alarm limit is set to Off. • Review the MVexp low alarm limit in Alarm Setup. Nebulizer not connected Low The Aerogen Nebulizer procedure is active but the nebulizer is not connected. The nebulizer cable is not detected. • Connect the nebulizer and cable. Negative airway pressure High3 Inspiratory pressure is below -10 cmH2O for more than 50 continuous ms. The ventilator detected negative airway pressure from the patient. • Check for an occlusion in the patient circuit. • Check for an occlusion in the patient circuit filters. • Review the Insp Trigger setting in Mode Settings. No patient effort High No spontaneous triggers have been detected for the set Patient Effort time. Patient has not triggered a breath within the set Patient Effort time. • Check the status of the patient. • Check for leaks in the patient circuit. • Review the Patient Effort time in alarm setup. O2 supply pressure high Low O2 supply pressure is greater than 95 psig for more than 0.5 seconds. O2 supply pressure is high. • Check the O2 source. • Set FiO2 to 21%. O2 supply pressure low Medium4 O2 supply pressure is less than 24.3 psig for more than 0.5 seconds. O2 supply pressure is low. The ventilator is delivering Air only. Air may be leaking into the O2 supply system. • Check the O2 connection. • Check the O2 source. CARESCAPE™ R860 8-18 2065490-001
Send Inquiry to This Supplier
You May Also Like
-
Module Spare Parts T8110C BUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts T8151BUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts T8231US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts T8310US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts T8431CUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts T8830US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts T9110US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts T9402US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts T9432US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts T9451US$ 1 - 100000MOQ: 1 Piece
