MVME5500-0163

MVME5500-0163 photo-1
US$ 1113 - 2023 MOQ: 1 Piece
Key Specifications
Get Latest Price
Brand Name:
MVME5500-0163
Place of Origin:
China
Model Number:
MVME5500-0163
Payment & Shipping
Payment Methods:
Port of Shipment:
China
Delivery Detail:
1 days
Brand Name MVME5500-0163
Place of Origin China
Model Number MVME5500-0163


Brand: MOTOROLA

Type:MVME5500-0163

Origin: the United States

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

The CI862 is powered from the processor unit via the CEX-Bus and requires no additional external power source. No field device is powered from the CI862. Use the following procedure to install the CI862: 1. Mount the unit onto the DIN-rail. 2. Connect the field bus cable to the LAN connector (right most connector). See the CI862 Installation book for TRIO field bus guidelines, cable types and length. The Hand-Held Monitor, if used, is connected to the HHM connector. Unit to Baseplate Alpha Code Lock The CI862 unit and baseplate have the locking device removed because of the placement of the electronics inside the unit. The electronics will not allow the CI862 unit to be installed in any baseplate with a locking device. However, other units could be inserted into the CI862 baseplate. Bus Termination The appropriate terminating resistor must be attached to both the beginning and end of the bus. The characteristic impedance for each type of cable is listed in Table 142. If the CI862 is at either end of the bus, the characteristic resistance is set by a switch on the Field Bus Interface Module, Table 17. If a TRIO module is at the beginning or end of the bus, the bus can be terminated with a resistor or a terminating resistance plug, 6202FP00150 for 150 W or 6202FP00075 for 75 W. BSM stubs should not be terminated.

The dip switch must be closed to make the termination connection. The default is open, (no internal termination). (2) The 110 ohm option may be used to terminate cables with an impedance in the range of 100 to 120 ohms

As shown in Figure 78, the dip switch is located on the bottom of the housing when looking from the front. Switch 1 is towards the top of the housing

Product Tags: DCS module , The PLC card a , The controller

Send Inquiry to This Supplier

* Message
0/5000

Want the best price? Post an RFQ now!
Verified Business License
Main Markets
North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe, Central America, Northern Europe, Southern Europe, South Asia, Domestic Market

Recommended Categories

Explore top categories and find suppliers for your specific needs