Contact Platform Support
Help CenterCksc Three Phase High Medium Voltage HV MV Resin Insulation Dry Type Iron Core Series Wound Reactor Inductor 1%with Ce Certificate CKSC-9/10-6% CKSC-15/10-6% for Transformer Substation 6kV~35kV Power System Svg Dry-Type Iron Core Inlet Reactor 6kv, 10kv,
Related Products
-
Arc Suppression Coil Extinction Coil Arc-Extinguish Coil Peterson CoilUS$ 888 - 5000MOQ: 1 Set -
Arc Suppression Coil Complete Set Neutral Point Grounding Protection EquipmentUS$ 5000 - 100000MOQ: 1 Set
-
High Quality Neutral Point Grounding Resistance Resistor Cabinet Cubicle Complete Set Neutral Point Earthing Protection Equipment For Transformer GeneratorUS$ 8000 - 80000MOQ: 1 Set
-
Oil-Immersed Adjustable Reactor Fully Completely Sealed Oil-Immersed Oil-Filled ReactorUS$ 1666 - 8666MOQ: 1 Set
-
Dry Magnetic-Shielding Shunt Reactor Dry Magnetic-Shielding Series Reactor Dry Semi-Core Series Reactor Dry Semi-Core Shunt ReactorUS$ 1000 - 5000MOQ: 1 Set
CKSC series high-voltage dry iron core series reactor
Model description
CKSC-48/10-6%
CK: Series reactor
S: S-three phases, D-single phase
C: C- Epoxy casting, G- Dipping
48: Reactor capacity(kVar)
10: System voltage (kV)
6%: Reactance rate(%)
CKSC series high-voltage dry iron core series reactor is mainly used for 6kV~35kV power system to connect in series with high voltage capacitor bank, which can effectively suppress and absorb higher harmonics, limit closing inrush current and operating over voltage, protect capacitor bank and improve system voltage waveform to improve the power factor of the grid.
Structural features
1.The reactor is divided into three-phase and single-phase, both of which are epoxy cast.
2.The iron core is made of high-quality low-loss cold-rolled oriented silicon steel sheet. After high-speed punching, it has the characteristics of small burrs, uniform rules, and neat and beautiful laminations, ensuring low-temperature rise and low noise during reactor operation.
3.The coil is epoxy cast type. Epoxy glass mesh is placed inside and outside the coil for reinforcement. The F-level epoxy casting system is used to cast under vacuum. The coil not only has good insulation performance, but also has good mechanical strength and can withstand high current shock and hot and cold shock without cracking.
4.The epoxy casting coil does not absorb water and has low partial discharge, and can be safely operated under harsh environmental conditions.
5.The upper and lower ends of the coil adopt epoxy pads and silicone rubber shock-proof pads, which effectively reduces the vibration of the coil during operation.
Conditions of Use
1.The altitude does not exceed 2000 meters.
2.Operating ambient temperature: -25℃~+45℃, relative humidity should not exceed 90%.
3.There is no harmful gas around and no flammable and explosive materials.
4. The surrounding environment should have good ventilation.
Performance and technical parameters
1.System voltage: 6kV, 10kV, 10.5kV, 11kV.
2.Reactance rate: 1%, 4.5%, 5%, 6%, 7%, 12%, 14%.
3.Insulation level: F level, reactor noise: ≤45dB.
4.Overload capacity: continuous operation at ≤1.35times
5.The imbalance between the reactor phases and phases is not greater than ±3%, and the inductance error is controlled within+3%.
The following parameters and technical requirements are required when order:
1.System rated voltage
2.Capacitor capacity
3.Capacitor side voltage
4.Reactance rate
5.Inlet and outlet method (double-side outlet, single-side outlet)
6.Other special requirements
Models
CKSC-6/10-6%
CKSC-9/10-6%
CKSC-12/10-6%
CKSC-15/10-6%
CKSC-18/10-6%
CKSC-24/10-6%
CKSC-27/10-6%
CKSC-30/10-6%
CKSC-36/10-6%
CKSC-42/10-6%
CKSC-48/10-6%
CKSC-54/10-6%
CKSC-60/10-6%
CKSC-72/10-6%
CKSC-84/10-6%
CKSC-90/10-6%
CKSC-108/10-6%
CKSC-126/10-6%
CKSC-144/10-6%
CKSC-12/10-12%
CKSC-18/10-12%
CKSC-24/10-12%
CKSC-36/10-12%
CKSC-54/10-12%
CKSC-120/10-12%
CKSC-144/10-12%
CKSC-180/10-12%
CKSC-216/10-12%
CKSC-252/10-12%
CKSC-288/10-12%
CKSC-324/10-12%
CKSC-360/10-12%
CKSC-396/10-12%
CKSC-432/10-12%
CKSC-480/10-12%
CKSC-504/10-12%
CKSC-576/10-12%
CKSC-600/10-12%
……
SVG dry-type iron core inlet reactor
The SVG inlet reactor is connected at the front of the SVG device, and its role is as follows:
1.Used to connect SVG device with the power grid to achieve energy buffering.
2.Reduce the ripple of SVG switch and reduce common mode interference.
3.Suppress the sudden change of current when the inverter is connected to the power grid, and realize the current smoothing effect.
4.If necessary, the grid voltage can be changed to a voltage suitable for inverter operation.
Customized products are available.
Send Inquiry to This Supplier
You May Also Like
-
High Voltage HV Dry Type Air-Cored Air Core Series Reactor for 6kv 10kv 35kv Power System for Reactive Power Compensation Ckgkl 6-35kv Dry Air-Core Flat Wave Reactor Dry Air-Core Phase Controlled ReactorUS$ 3000 - 5000MOQ: 1 Set
-
Bksc High Voltage Dry Iron-Core Iron Core Shunt Reactor 10000V 10kvar 6% Shunt Reactor Tank Filter Harmonic Reactor Fixed InductorUS$ 1666 - 2888MOQ: 1 Set
-
Qksc (G) Series Epoxy Casting Dipping High Voltage Starting Start-up Reactor Inductor for AC Asynchronous MotorUS$ 1500 - 2500MOQ: 1 Set
-
Bam Bfm Bwf Bff Customized High Quality 11kv Kvar 110kv Kvar High Voltage HV Shunt Capacitor Power Capacitor Unit Safety Film Non-PCB for AC Power SystemUS$ 75 - 200MOQ: 100 Sets
-
Afm Aam Awm Aff 100kVA 11kv High Voltage HV AC Filter Power Capacitor to Absorb High Harmonics and Conduct Reactive Power Compensation for AC Power System Power GridUS$ 88 - 200MOQ: 10 Pieces
-
Cam High Voltage Series Power Capacitor for 50Hz or 60Hz AC Power Systems to Compensate the Inductance of Power Lines Reduce Voltage Landing Increase Transmission Capacity and Improve Line StabilityUS$ 166 - 288MOQ: 10 Pieces
-
Fam Ffm Fwf Fff High Voltage HV Protective Protection Power Capacitor With High-voltage Resistors in 35KV AC Power Transmission and Distribution Systems for Absorbing Transient Over VoltageUS$ 80 - 160MOQ: 10 Pieces
-
Rfm Rwm Film Dielectric Variable Power Electric High Voltage HV Oil Filled Electrolytic Passive Component Water Cooling Capacitor for High Frequency Medium Frequency Super Induction Casting Furnace Heating Melting SystemUS$ 60 - 80MOQ: 50 Pieces
-
Bamh Bfmh Bffh Jbbh High Voltage HV Assembled Collective Compact Type Tank Large Capacity Integrated Shunt Capacitor Bank for Power Grid for Reactive Power Compensation in Power Frequency Power SystemsUS$ 6000 - 46000MOQ: 1 Set
-
Enspc Quick Response Three-Phase Unbalanced Automatic Adjustment Adjusting Device Current Regulation Treatment Device Circuit Manage Device for 50/60Hz AC 380 400V Low Voltage lv Power Distribution System Urban Network and Agricultural NetworkUS$ 850 - 3200MOQ: 1 Set
