Screw Pump
Screw pump is usually used to feed centrifuge. Including screw shaft (rotor) and screw shaft bushing (stator). By a special geometry shape of the this two parts, they form pressurize capacity separately. In a result, fluid flows along with shaft, inner flow speed is slow, capacity remains and pressure is steady, no vortex and agitating generated.
BZ screw pump's flow rate can be adjusted, a wide range of different type and viscosity liquid can be transported.
| Model | Capacity | Lift | Motor | Speed | inlet | Outlet | EX Standard | Weight | Dimension |
| BZG10-040 | 10m³/h | 0.3Mpa | 4kw | 244RPM | DN80 | DN80 | ExdIIBt4/IECEX/ A-TEX | 245kg | 2245x320x550mm |
| BZG20-055 | 20m³/h | 5.5kw | 210RPM | 320kg | 2450x340x562mm | ||||
| BZG30-075 | 30m³/h | 7.5kw | 258RPM | DN100 | DN100 | 385kg | 2761x370x600mm | ||
| BZG40-110 | 40m³/h | 11kw | 252RPM | 450kg | 3270x370x665mm | ||||
| BZG50-110 | 50m³/h | 273RPM | DN125 | DN125 | 608kg | 3790x400x782mm | |||
| BZG60-150 | 60m³/h | 15kw | 225RPM | 649kg | 3320x550x740mm | ||||
| BZG70-220 | 70m³/h | 22kw | 230RPM | DN150 | DN150 | 875kg | 3740x420x785mm | ||
| BZG80-220 | 80m³/h | 283RPM | 875kg | 3740x420x785mm | |||||
| BZG90-220 | 90m³/h | 30kw | 215RPM | 910kg | 3850x440x785mm |
. Rotation speed can be adjusted, to meet different materials pumping demand
. High suctoin and discharge ability
. Even continuous flow, small vibration, low noise
· Long operational life with reliable performance.
Send Inquiry to This Supplier
You May Also Like
-
Vertical Cuttings DryerNegotiableMOQ: 1 Set
-
Drilling Waste Management SystemNegotiableMOQ: 1 Set
-
Oil Sludge Treatment SystemNegotiableMOQ: 1 Set
-
Decanter CentrifugeNegotiableMOQ: 1 Set
-
Shale ShakerNegotiableMOQ: 1 Set
-
Vacuum Shale ShakerNegotiableMOQ: 1 Set
-
DesanderNegotiableMOQ: 1 Set
-
DesilterNegotiableMOQ: 1 Set
-
Mud CleanerNegotiableMOQ: 1 Set
-
Screw PumpNegotiableMOQ: 2500 Pieces