Contact Platform Support
Help CenterSNC(C) Series Solvent Based Screen Inks for Nylon Fabrics, Tote Bag Cloth, Oxford Cloth, Etc.
Related Products
-
PPG Series for PP and PE MaterialsUS$ 7 - 9MOQ: 300 Kilograms -
PPD Series for PP and PE MaterialsUS$ 7 - 9MOQ: 300 Kilograms
-
RP Series for Rubber Products, EVA Products, Balloon, TPR Etc.US$ 4 - 6MOQ: 200 Kilograms
-
SOLVENT BASED SCREEN INK FOR HEAT TRANSFERUS$ 6 - 9MOQ: 200 Kilograms
-
PPD INKUS$ 10 - 15MOQ: 5 Kilograms
1. Substrates:
Waterproof nylon fabric、non-waterproof fabric、luggage fabric、 Oxford fabric and nylon plastic.
2. Product features:
High-gloss、good softness、strong coverage、good adhesion on high waterproof nylon fabric.
3. Test items&results:
Adhesion: good |
Scratch resistance: 4-5 |
Wear resistance: 4-5 |
Crumpling resistance: 5 |
Acid resistance: 4-5 |
Alkali resistance: 4-5 |
Wash resistance: 3-4 |
Migration resistance: 4-5 |
4. Technical parameters:
Color shade: refer to color card |
Color concentration:8-15%
|
Fineness:≤7um |
Viscosity: 200-280p |
Gloss: 75-85 |
Liquidity: 10-15mm/s |
Solid content: ≥45% |
5. Instructions:
(1) Mesh: 150-350(60-140T) polyester mesh
(2) Squeegee: Polyurethane squeegee at the hardness 65-85 is recommended.
(3) Indicative dosage: 30㎡/㎏ on the 200 mesh
(4) Drying: natural drying (surface drying in 7-15 mins, full drying in more than 24 hours) or blow drying at temperature below 100℃.
(5) Selective Solvents: quick drying water 719, medium drying water 718 or cyclohexanone based on printing conditions.
(6) Stencil cleaning: organic solvent (e.g. stencil cleaning water)
6. Notes:
(1) Please pay attention to the solvent′s dissolving capacity while diluting the ink.
(2) It will cause pattern scratch by the stack of finished press works on PVC film due to the PVC′s poor solvent resistance. So pay attention to the drying status of ink when finish work and avoid excessive overlap.
(3) Color migration will occur while printing on PVC film containing a lot of plasticizers. The printing ink with good anti-permeability is recommended.
(4) The rigorous sample test before use is necessary to check the printing ink′s adhesion on different waterproof nylon fabrics.
(5) The catalyst 9004 should be added appropriately (by 5-8%) into the ink to improve adhesion when printing on waterproof nylon fabric. But the printing ink with added catalyst must be finished within 8 hours, or will be scrapped.
7. Storage:
It can be stored for 36 months at 5-35℃. Keep away from strong light. Avoid strong acid and strong alkali.
Send Inquiry to This Supplier
You May Also Like
-
RP SeriesNegotiableMOQ: 50 Kilograms
-
Gloss PVC InkNegotiableMOQ: 200 Kilograms
-
Gloss PVC InkNegotiableMOQ: 50 Kilograms
-
Solvent Based Screen InksUS$ 5 - 8MOQ: 10 Kilograms
-
UVC-MEDIUM ABRASIVE VARNISHUS$ 4 - 7MOQ: 200 Kilograms
-
Spot UV VarnishUS$ 6 - 7MOQ: 100 Kilograms
-
UVC-ABRASIVE VARNISH(STRUCTURE VARNISH)NegotiableMOQ: 50 Kilograms
-
Heat Transfer CLEARNegotiableMOQ: 50 Kilograms
-
Heat Tranfer WhiteNegotiableMOQ: 50 Kilograms
-
KANO-8800 EMULSION for Both Water Based and Solvent Based InkNegotiableMOQ: 1 Kilogram
