compax pcd blanks,Pcd diamond blanks,Pcd blanks manufacture,Polycrystalline Diamond PCD

Dimensions (mm) diameter × thickness

diameter64×1.6/2.0/3.2

diameter94×4.78

diameter74×1.6/2.38/3.2

diameter74×1.6/2.0/3.2

diameter60×1.6/2.0/3.2

diameter60×3.18/4.76

diameter58×1.6/3.2

Mores PCD cutting tool blanks (Ø58mm) are produced by sintering selected diamond particles at ultra-high pressure and high temperature, and consist of a diamond layer or a tungsten carbide substrate. Our PCD discs can be cut freely into tips by both laser cutting and EDM cutting, which are widely used for woodworking and metalworking tools due to their longer working lives and higher efficiencies. Also, our company is capable of supplying PCD cutting tool tips in various shapes and different sizes in according to your drawings, cut either by laser or EDM wire.

If you need any products, do not hesitate to contact

Annamoresuper@gmail.com

@moresuperhard.com

WhatsApp:+8615617785923

Skype:Annawng

Wechat:15617785923

QQ:1664333593

Mobile:+86-156177854923

Tel/Fax:+86-0371-86545906

PCD BLANKS is widely used for machining non-ferrous metals and alloys, such as aluminum, copper, aluminum/gray iron composites, as well nonmetallic materials such as wood, chipboard, ceramics, plastic, rubber, ect., where high abrasion resistance and good surface finish are required.

The blank has the advantages of high hardness, high thermo stability, high chemical stability, good strength and weld ability.The working life of a PCD cutting edge is usually 50 to 250 times longer than that of traditional sintered carbide cutting tools.

1. Long working life.

2. Uniform surface finish.

3. Reduces machine down time.

4. Highly improved workpiece quality and excellent dimensional control.

5. Increase productivity.

6. High material removal rate.

7. Lower cost per piece.