Single port Gigabit POE Fiber Media Converter Gigabit POE Fiber Transmitter and Receiver POE camera to fiber SC 20KM

BRIEF INTRODUCTION

DLX-PFS01-FG series 10/100M/1000M Ethernet Fiber Switch is included one 1000M fiber optical port and one POE 10/100M/1000M Ethernet ports. It has the function of photoelectricity switchover between 1channel 10/100M/1000M Ethernet ports and 1000M optical port. Adopts single port full-power technology, and single port supports Max.30W and feeds enough power to Array IR CCTV cameras. Auto-detect and recognize IEEE 802.3AF/IEEE 802.3AT standard PD(Powered Devices) and feeds power to it. Supports smart power management, if the power of PD over 53W, the system will stop feeds low-priority devices. Has smart POE auto-recognized system to protect devices from overflow current and over -voltage etc. Adopts Auto-standby mode and cable distance detection management to ensure the switch has excellent energy saving capability. Using imported original industrial components and Gold-plated PCB. All RJ45 ports adopt advanced Self-healing multi-stage lightning protection design, have high-level lightning, surge and ESD protection.

APPLICATIONS

• High-definition IP video surveillance and power supply

• High Way& Road surveillance system, Capture system

• Video-surveillance system of large factories and mines systems

• IP Network Multi-function system

• High Way & Toll Station Surveillance

• Public Security Surveillance

• Surveillance and cable TV system

• Intelligent traffic monitoring system

• High Quality Video Conference

• Broadcast and TV program transmission

• Long-distance multimedia teaching

• Industrial Closed Circuit Television Surveillance

FEATURES

• Adopts import industry PSE chip and Taiwan YDS transformer

• Single port full-power technology, and single port supports Max.30W

• Supports IEEE802.3AF and IEEE802.3AT protocol, Auto-detect and recognize IEEE 802.3AF/IEEE 802.3AT standard PD(Powered Devices) and feeds power to it

• Supports smart power management, if the power of PD over 53W, the system will stop feeds low-priority devices

• Supports Auto-standby mode and cable distance detection management, if no devices been connected, then auto-standby to save energy, if cable distance less than 10meters,then will use Lower transmission power

• Smart POE auto-recognized system to protect devices from overflow current and over -voltage etc.

• 2K MAC address

• 1/2/3/6 lines or 4/5/7/8 lines power supply optional, supports all PD devices

• Anti-lightning and ESD protection for all Ethernet ports, power ports.

• Immersion gold PCB board, Industry grade components

• Multi-services Flexible Configuration on the Same Platform

• Auto-negotiate to NIC/HUB and MDI/MDI-X

• Support VLAN Network isolation and BSTM broadcast storm-control setting

• Indicators for Power Supply, Ethernet etc.

• Supports line speed switching of all ports and in 64~1536 frame length can reach line speed

• Standard: Full-duplex adopts IEEE 802.3x standard, Half-duplex adopts Back pressure standard

• Wall mounted installation

• Transmission distance: 2km(multi-mode),20km,40km,60km,80KM,100km,120km optional(Single-mode)

SPECIFICATIONS