Mini single port Gigabit POE IP camera to fiber optical transmitter and receiver POE camera over fiber 1000M POE IP fibe

BRIEF INTRODUCTION

DLX-PFS01-FG series 10/100M/1000M EthernetFiber Switch is included one 1000M fiberoptical port and one POE 10/100M/1000MEthernetports.

It has the function of photoelectricity switchover between 1channel 10/100M/1000MEthernet ports and 1000M optical port. Adopts single port full-powertechnology, and single port supports Max.30W and feeds enough power to Array IRCCTV cameras.Auto-detect and recognizeIEEE 802.3AF/IEEE 802.3AT standard PD(Powered Devices) and feeds power to it.Supports smart power management, if the power of PD over 53W, the system willstop feeds low-priority devices. Has smart POE auto-recognized system toprotect devices from overflow current and over -voltage etc. AdoptsAuto-standby mode and cable distance detection management to ensure the switchhas excellent energy saving capability. Using imported original industrialcomponents and Gold-plated PCB. All RJ45 ports adopt advanced Self-healingmulti-stage lightning protection design, have high-level lightning, surge andESD protection.

APPLICATIONS

●High-definitionIP video surveillance and power supply

●HighWay& Road surveillance system, Capture system

●Video-surveillancesystem of large factories and mines systems

●IPNetwork Multi-function system

●High Way& Toll Station Surveillance

●PublicSecurity Surveillance

●Surveillanceand cable TV system

●Intelligenttraffic monitoring system

●HighQuality Video Conference

●Broadcastand TV program transmission

●Long-distancemultimedia teaching

●IndustrialClosed Circuit Television Surveillance

FEATURES

●Adoptsimport industry PSE chip and Taiwan YDS transformer

●Singleport full-power technology, and single port supports Max.30W

●SupportsIEEE802.3AF and IEEE802.3AT protocol, Auto-detect and recognize IEEE802.3AF/IEEE 802.3AT standard PD(Powered Devices) and feeds power to it

●Supportssmart power management, if the power of PD over 53W, the system will stop feedslow-priority devices

●SupportsAuto-standby mode and cable distance detection management, if no devices beenconnected, then auto-standby to save energy, if cable distance less than10meters,then will use Lower transmission power

●SmartPOE auto-recognized system to protect devices from overflow current and over-voltage etc.

●2K MACaddress

●1/2/3/6 lines or 4/5/7/8 lines power supply optional, supportsall PD devices

●Anti-lightningand ESD protection for all Ethernetports, power ports.

●Immersiongold PCB board, Industry grade components

●Multi-servicesFlexible Configuration on the Same Platform

●Auto-negotiateto NIC/HUB and MDI/MDI-X

●SupportVLAN Network isolation and BSTM broadcast storm-control setting

●Indicatorsfor Power Supply, Ethernet etc.

●Supportsline speed switching of all ports and in 64~1536 frame length can reach line speed

●Standard:Full-duplex adopts IEEE 802.3x standard, Half-duplex adopts Back pressurestandard

●Wallmounted installation

●Transmissiondistance: 500m(multi-mode),20km,40km,60km,80KM,100km,120km optional(Single-mode)