Home > Electrical & Electronics > Telecommunication & Broadcasting > Fiber Optic Equipment > 256 Voice(FXS/FXO) Over Fiber Phone Over Fiber Multiplexer

256 Voice(FXS/FXO) Over Fiber Phone Over Fiber Multiplexer

256 Voice(FXS/FXO) Over Fiber Phone Over Fiber Multiplexer photo-1
256 Voice(FXS/FXO) Over Fiber Phone Over Fiber Multiplexer photo-2
US$ 2480 - 2680 MOQ: 1 Piece
Key Specifications
Get Latest Price
Brand Name:
Baudcom
Place of Origin:
China
Model Number:
BD-OP-MUX256
Payment & Shipping
Payment Methods:
Port of Shipment:
any port in China
Delivery Detail:
7 days
Brand Name Baudcom
Place of Origin China
Model Number BD-OP-MUX256

DESCRIPTION:   

BD-OP-MUX256  is a multi-service fiber multiplexer which can realize 256channel voice  and 4*10/100/1000M Gigabit ethernet over fiber transmission.The fiber  multiplexer is rack mount device which have 16slots for 16voice card or  E1 card.The device support SNMP andconsole management.

 

Features

Ø        Based on the integrated circuit intellectual property rights;

Ø        Plug-in  design, convenient way to replace the question, to avoid the integral  equipment 1 telephone problems are needed to replace the problem;

Ø        Convenient expansion, increase the board can, convenient maintenance, replacement card;

Ø        The  equipment for 4U 19 inch machine frame, a total of a port plate and 4  16 telephone board, light board provides 4 fast / Gigabit Ethernet  interface and an optical interface +2 business interface such as  RS232/RS485/RS422 asynchronous data, switching signal, each plate can be  inserted network management board, 16 FXO/FXS plate, 8 EM2/4 board, E1  interface board, 8 serial data plate....;

Ø        This device is configured to route 256, if the user to expansion in 60 basis, only need to increase the phone card can be;

Ø        60 speech, support caller ID function and reverse polarity charging function;

Ø        Each site each schedule function;

Ø        4 Ethernet interface options for exchange, also can be divided into VLAN;

Ø        Ethernet interface for fast/Gigabit rate or optional, full duplex or half duplex adaptive;

Ø        Have a view displays the working status of remote device in the end;

Ø        Can choose various power: AC220V, DC-48V/DC24V etc.;

Ø        The telephone interface with lightning protection, lightning protection up to GB/T17626.5 (IEC61000-4-5) 8/20 μ s short-circuit current, open-circuit peak output voltage of 6KV standard.

 

Parameters

u      Fiber

Multi-mode Fiber

50/125um, 62.5/125um,

Maximum transmission distance: 5KM@62.5/125um Multi-mode fiber, attenuation (3dbm/km)

Wave Length: 850nm

Transmitting power: -12dBm (Min) ~-9dBm (Max)

Receiver sensitivity: -28dBm (Min)

Link budget: 16dBm

Single-mode Fiber

8/125um, 9/125um

Maximum transmission distance: 40Km

Transmission distance: 40KM@9/125um single mode fiber, attenuation (0.35dbm/km)

Wave Length: 1310nm

Transmitting power: -9dBm (Min) ~-8dBm (Max)

Receiver sensitivity: -27dBm (Min)

Link budget: 18dBm

u      E1 Interface

Interface Standard: comply with protocol G.703;
Interface Rate: 2048Kbps
±50ppm;
Interface Code: HDB3;

E1 Impedance: 75Ω (unbalance), 120Ω (balance);

Jitter tolerance: In accord with protocol G.742 and G.823

Allowed Attenuation:0~6dBm 

u      FXS Interface

Ring voltage: 75V

Ring frequency: 25HZ

Two-line Impedance: 600 Ohm (pick up)

Return loss: 40 dB

u      FXO Interface

Ring detect voltage: 35V

Ring detection frequency: 17HZ-60HZ

Two-line Impedance: 600 Ohm (pick up)

Return loss: 40 dB

u                Power

Power supply: AC180V ~ 260V;DC –48V;DC +24V

Power consumption: ≤7W

u                Size

1U/19 inch:445mm(length)*365mm(width)*200mm(height)

u      Working Environment

Working temperature:  -10°C ~ 50°C
Working Humidity:          5%~95 % (no condensation)

Storage temperature:      -40°C ~ 80°C
Storage Humidity:      5%~95 % (no condensation)


256 POTs over fiber multiplexer

Question: Regarding  to power supply, do we have any restriction to use DC or AC module in subscriber  side or office side?

Answer:the 256 POTs fiber multiplexer FXO side can use AC or DC power,both of them are ok;but for  FXS side,DC is ok.if you use AC power,you need combine  the adator we sent to  you.

Can  we use one AC + one DC at both sides? 

yes,no  problem

Are  these hot standby and load sharing?

 support 


  • Ordering information

BD-OP-MUX256 rack chassis, 19inch 4U high, 16slots for service, with 4Gigabit ethernet ports, one fiber port, network mangement, AC220V and DC48V Price included 16pcs voice card
16voice card 16channel voice (FXS or FXO)  card
power card AC220V or DC48V card

Product Tags: Voice over Fiber Multiplexer , Phone over Fiber , FXO FXS over Fiber

Send Inquiry to This Supplier

Message
0/5000

Want the best price? Post an RFQ now!
Business Type
Manufacturer
Year Established
2006
Annual Export Value
US$1 Million - US$1.5 Million
Port of Shipment
Shanghai, Hong Kong, any port of China