8 Voice(FXS/FXO) Over Fiber Phone Over Fiber Multiplexer
Functions
The voice over fiber multiplexer is point to point fiber transmitting equipment, which realizes 1~8 channel voice (FXO, FXS) POTs phone over fiber and 4 E1,4*100M Ethernet, 4 channel RS232 for option. Its merits include complete warning function, high integration, low consumption, stable performance and convenient usage.
Features n provides 4 channel E1/ G.703 for option; n provides 1 channel 100M (liner) Ethernet ports for option n provides 8 channel voice port, FXO and FXS for option; also for 2/4 wire E&M n provides 4 channel RS232, rate supports 300-15200 bps for option; n Ethernet port 10/100M, full/half duplex auto-adaptable and supports VLAN; n Ethernet port supports AUTO-MDIX (twisted cable and straight cable auto-adaptable); n 1-8 channel voice connection, supports calling indication; n Configuration: point to point; n Voice port supports O port and S port or E&M interface for order, O port connects switch and S port connects user’s phone; n Optical interface supports SC/FC interface and supports single fiber interface
Optical interface
Optical wavelength: single mode 1310nm/1550nm
Fiber: single fiber or double fiber for option
Transmitting consumption: -9dBm/-5dBm
Transmission range: 0-50Km/120Km for option
Optical interface: SC/FC
Receiving and dispatching module: >-6dBm
Optical receiver receiving sensitivity -11)
Fiber circuit code: NRZ code
Ethernet Interface
Rate: 10/100M, full/duplex auto-negotiation
Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN)
MAC Address Entiries: 4096 Entiries
Total Memory Sizes: 64MBits SDRAM
Physical interface: RJ45, support AUTO-MDIX
Voice Phone Interface:
FXS:
Alarm voltage: 75V
Alarmf requency: 25HZ
2 line input impedance: 600Ω (hanging off)
Wastage: 40db
FXO:
Alarm detecting voltage: 35V
Alarm detecting frequency: 17HZ-60HZ
2 line input impedance: 600Ω (hanging off)
Wastage: 40db
E wire:
Max current: 22mA
Saturation voltage: 3V
Dial speed: >20pps
M wire:
steady current: 7 mA
min test current: 5 mA
pluse dial recognition: >20pps
RS232 port Rate: 300-115.2Kbps auto-adaptable (Asynchronous) Interface characteristic: satisfies ITU-T V.24 Dimension(19inch rackmount) 2 433mm(L) 2 138mm(W) 2 44mm(H) Power supply working voltage range wide, good anti-disturb and Isolation, work stable option I – DC-48V,range DC-36V~DC-72C option II – AC220V,range AC165V~AC240V Power Consumption: Environment condition Operating temperature: 0C~+50 C Storage temperature: -20 C~+70 C Relative temperature:95% (uncondensed) Related Link:
Questions about POTS(fxs/fxo) phone over fiber multiplexer
Ordering information
| BD-OP-MUX08/S | 8 POTS(FXS)over Fiber multiplexer,8channel FXS phone over fiber,SC 20km,power AC 220V or DC48V. |
| BD-OP-MUX08/O | 8 POTS over Fiber multiplexer,8channel FXO phone over fiber,SC 20km,power AC 220V or DC48V. |
| BD-OP-MUX08/S/ETH | 8POTS over Fiber multiplexer,4*10/100M etherne+8channel voice FXS phone over fiber,SC,20km,power AC220V or DC48V |
| BD-OP-MUX08/O/ETH | 8POTS over Fiber multiplexer,4*10/100M etherne+8channel voice FXO phone over fiber,SC,20km,power AC220V or DC48V |
| BD-OP-MUX08/4E1/ETH/RS232 | 8POTS(FXS or FXO)+4E1+4Ethernet+RS232 over Fiber multiplexer,SC 20km,power AC220V or DC48V |
Send Inquiry to This Supplier
You May Also Like
-
360 Channels POTS Phone (FXS/FXO) Over Fiber Voice Fiber MultiplexerUS$ 2480 - 2680MOQ: 1 Piece
-
4Voice(FXS/FXO) Over Fiber Phone Over Fiber MultiplexerUS$ 70 - 90MOQ: 1 Piece
-
1 Channel Video Fiber MultiplexerUS$ 15 - 21MOQ: 1 Piece
-
4 Channel Video Fiber MultiplexerUS$ 21 - 31MOQ: 1 Piece
-
8 Channel Video Fiber MultiplexerUS$ 31 - 41MOQ: 1 Piece
-
16 Channel Video Fiber MultiplexerUS$ 88 - 108MOQ: 1 Piece
-
3G HD SDI Digital Video Fiber Optic TransceiverUS$ 10 - 20MOQ: 1 Piece
-
128 Channel Video Fiber MultiplexerUS$ 1000 - 1300MOQ: 1 Piece
-
Ethernet Over Coax Converter EOC Slave Unit With WifiUS$ 27 - 35MOQ: 1 Unit
-
HomePlug AV Solution Ethernet Over Coax Converter EOC Slave ModemUS$ 19 - 23MOQ: 1 Unit