100M 24 Port SFP 2G TP SFP Web Smart Optical Fibre Switch Through Ethernet Network

 
100M 24 Port SFP 2G TP SFP Web Smart Optical Fibre Switch Through Ethernet Network
 
1. PRODUCT DESCRIPTION:
The FR-SW-2402 optical fiber switch provides 24-port optical fibers with 2 Gigabit TP/SFP ports , the product design for Engineering, can be installed in 19inch chassis. It’s one model of the best optical access for fiber to building and Home base on cost-effective and stable performance. For efficient management, The FR-SW-2402 is equipped with web interface and can be programmed for basic switch management functions such as port configuration, VLAN, port mirroring, Qos, bandwidth control, IGMP snooping and misc configuration.
 
2. Feature:
 
2.1 Physical ports
 
24-port 100Base-FX optical fibers
2-port Gigabit TP Combo SFP
 
2.2 Management Features
 
- Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3z and IEEE 802.3ab Gigabit Ethernet standard
- Each Gigabit TP ports support auto-negotiation-10/20, 100/200, 1000/2000Mbps supported, Auto-MDI/MDI-X detection on each
RJ-45 port
- Prevents packet loss with back pressure (Half-Duplex) and 802.3x
- PAUSE frame Flow Control (Full-Duplex)
- High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
4K MAC address table, automatic source address learning and ageing
- Port-Based VLAN and IEEE 802.1Q Tagged VLAN
- Static Port Trunk
- IGMP snooping v1 and v2 for Multi-media application
- Broadcast storm filter
- Port mirroring allows monitoring of the traffic across any port in real time
 
2.3 Quality of Service
 
- Supports QoS and bandwidth control on each port
- IEEE 802.1p class of service ; support Strict and
- TCP/UDP Port Based QoS
 
2.4 Security
 
- MAC Address Filter
- IP Address Filter
- TCP/UDP Filter
 
2.5 Management
 
- Web interface for Switch basic management and
- LED indicators for easy network diagnose
- Firmware upgrade by HTTP file transfer protocol through Ethernet network
- Reset Button for system reset and reset to factory default
- EMI standards comply with FCC, CE class A
 
2.6 Technical specifications
 

 
Product Information: