Contact Platform Support
Help CenterApollo Seiko DCN-10DV1 Nitrogen Soldering Tip DCN Series Tips Apollo Solder Tip
Related Products
-
,Apollo Seiko DCN-24DV1-2 Nitrogen Soldering Tip,Apollo Solder Tips,DCN Series TipsUS$ 37 - 37MOQ: 100 Kilograms -
Apollo Seiko DCN-30DV1 Nitrogen Soldering Tips Soldering Bit Solder Tip Soldering Iron TipsUS$ 37 - 37MOQ: 100 Kilograms
-
Apollo Seiko TM-08D Nitregen Soldering Iron Cartridge Apollo Solder TipsUS$ 38 - 38MOQ: 100 Kilograms
-
Apollo Seiko TS-08D Nitregen Soldering Iron Cartridge TS Series Tips Apollo Solder TipsUS$ 38 - 38MOQ: 100 Kilograms
-
Japan Tsutsumi TKH4-08-E75 Robotic Soldering Tips Tsutsumi TipsUS$ 60 - 60MOQ: 10 Kilograms
Apollo soldering tips DCN series:
Leisto's production Apollo Seiko compatible soldering tips have good performance such as low temperature difference (plus-minus 10 degree),smooth solder wetting performance.The great base copper & precise plating technology improves the thermal conductivity and reduce the temperature recovery time.The soldering tip can make the robots get the most out of automated soldering:working stable,low faulty soldering joints.
Specifications of Apollo DCN-10DV1 Soldering Tip:
two side tinning
DC48V, Total Length: 101mm
Diameter: 6.4mm
Tip width: a: 3mm, b: 1mm
Tip thickness (c): 0.4mm
Tin area, two side (d): 1.5m
Advantages of Leisto Soldering Tip:
Made with pure oxygen-free copper
Long time electroplating makes the platinglayer more denser, the life time is longer than other tips
Short lead time for standard robot tips
The cost is much lower than original tips
Custom made available
Offer sample for testing
Tip Cleaning Notes:
If the sponge cleaner is utilized, air-blowcleaning is normally not required.
Some applications require air-blow &sponge tip cleaning (depending upon tip type)
Standard cleaning duration is 0.5 second
The iron tip does not need to be extendedif not required
The air-blow cup is not included with thestandard Luna system
If the tip is not “wetting”with solder(oxidation):
Remove pre-solder on tip completely.
Remove oxidation by sand paper aftercooling down the iron tip to room temperature.
Turn on the power and apply solder on theiron tip during rising the temperature (manually).
The tip will wet with solder by the aboveprocess
Shelia
LEISTO INDUSTRIAL CO., LIMITED
Tel.: +86 755 29472883 H/P: +86 18814350173
Skype: leisto.sales5
Send Inquiry to This Supplier
You May Also Like
-
Apollo Solder Tips TS Series Tips Apollo Seiko TS-10D Nitregen Soldering Iron CartridgeApollo Solder Tips TS Series Tips Apollo Seiko TS-10D Nitregen Soldering Iron CartridgeUS$ 35 - 35MOQ: 100 Kilograms
-
TM Series Tips Apollo Seiko TM-10D Nitregen Soldering Iron CartridgeUS$ 38 - 38MOQ: 100 Kilograms
-
UNIX Tips P1V12-28 Robotic Slot Soldering Iron Tips for Japan Unix Soldering RobotUS$ 33 - 33MOQ: 10 Kilograms
-
Ersa 832 Series Soldering Tips 0832CDLF/SB Soldering Tips Soldering Bit Solder Tip Ersa TipsUS$ 1.7 - 1.7MOQ: 10 Kilograms
-
Ersa 0832EDLF/SB Soldering Tips 832 Series Soldering Tips Solder Tips Soldering Bit Ersa TipsUS$ 1.7 - 1.7MOQ: 10 Kilograms
-
HAKKO T12-BC3 Replacement Solder Tip Soldering BitUS$ 3.2 - 3.2MOQ: 50 Kilograms
-
HAKKO T12-B Replacement Tips,T12 Series Tips, Hakko TipsUS$ 3.2 - 3.2MOQ: 50 Kilograms
-
TKN5-13PPS30-3 Robotic Soldering Iron Tips for Tsutsumi Soldering RobotUS$ 55 - 55MOQ: 10 Kilograms
-
TSUTSUMI Soldering Bits TKH84-12EW30-20 Soldering Iron TipsUS$ 55 - 55MOQ: 10 Kilograms
-
Japan TSUTSUMI TKH6-17PPD25 Soldering TipsUS$ 55 - 55MOQ: 10 Kilograms
