Contact Platform Support
Help Center,Apollo Seiko DCN-24DV1-2 Nitrogen Soldering Tip,Apollo Solder Tips,DCN Series Tips
Related Products
-
Apollo Seiko DCN-30DV1 Nitrogen Soldering Tips Soldering Bit Solder Tip Soldering Iron TipsUS$ 37 - 37MOQ: 100 Kilograms -
Apollo Seiko DCN-10DV1 Nitrogen Soldering Tip DCN Series Tips Apollo Solder TipUS$ 36 - 36MOQ: 100 Kilograms
-
Apollo DCS-24DV1-2 Soldering Tip for Apollo Seiko Soldering Robots Apollo Tips DCS Series TipsUS$ 35 - 35MOQ: 100 Kilograms
-
Apollo DCS-13D-2 Soldering Tip Cartridge Apollo Solder Tips DCS Series TipsUS$ 35 - 35MOQ: 100 Kilograms
-
Apollo DCS-24DV1 Soldering Tip for Apollo Seiko Soldering Robots Apollo Solder Tips DCS Series TipsUS$ 35 - 35MOQ: 100 Kilograms
Apollo solder tips DCN series:
Leisto's production Apollo Seiko compatible soldering tips have good performance such as low temperature difference (plus-minus 10 degree),smooth solder wetting performance.The great base copper & precise plating technology improves the thermal conductivity and reduce the temperature recovery time.The soldering tip can make the robots get the most out of automated soldering:working stable,low faulty soldering joints.
Specifications of Apollo DCN-24DV1-2 Soldering Tip:
two side tinning
DC48V, Total Length: 101mm
Diameter: 6.4mm
Tip width: a: 2mm, b: 2.4mm
Tip thickness (c): 0.8mm
Tin area, two side (d): 2.0mm
Advantages of Leisto Soldering Tip:
- Made with pure oxygen-free copper
- Long time electroplating makes the plating layer more denser, the life time is longer than other tips
- Short lead time for standard robot tips
- The cost is much lower than original tips
- Custom made available
Tip Cleaning Notes:
If the sponge cleaner is utilized, air-blow cleaning is normally not required.
Some applications require air-blow & sponge tip cleaning (depending upon tip type)
Standard cleaning duration is 0.5 second
The iron tip does not need to be extended if not required
The air-blow cup is not included with the standard Luna system
If the tip is not “wetting” with solder (oxidation):
Remove pre-solder on tip completely.
Remove oxidation by sand paper after cooling down the iron tip to room temperature.
Turn on the power and apply solder on the iron tip during rising the temperature (manually).
The tip will wet with solder by the above process.
Shelia yang
LEISTO INDUSTRIAL CO., LIMITED
Skype: leisto.sales5
E-mail:sales5@leisto.com
Send Inquiry to This Supplier
You May Also Like
-
Apollo Seiko DCS-20DV1 Nitregen Soldering Tip Cartridge DCS Series Tips Apollo Soldering BitUS$ 35 - 35MOQ: 100 Kilograms
-
Apollo DCS-30DV2 Soldering Tip for Apollo Seiko Soldering Robots Apollo Tips DCS Series TipsUS$ 36 - 36MOQ: 10 Kilograms
-
Apollo DCS-30DV1 Soldering Tip for Apollo Seiko Soldering Robots Apollo Solder Tips DCS Series TipsUS$ 36 - 36MOQ: 100 Kilograms
-
Apollo DCS-40DV1 Soldering Tip for Apollo Seiko Soldering Robots Apollo Solder Tips DCS Series TipsUS$ 36 - 36MOQ: 100 Kilograms
-
Apollo DCS-50DV1 Soldering Tip for Apollo Seiko Soldering Robots Apollo Solder Tips DCS Series TipsUS$ 36 - 36MOQ: 100 Kilograms
-
Apollo Tips DCS Series Tips Apollo Seiko DCS-20DV2 Soldering Tip CartridgeUS$ 36 - 36MOQ: 100 Kilograms
-
Apollo DCS-10DV1-2 Soldering Tip for Apollo Seiko Soldering Robots Apollo Tips DCS Series TipsUS$ 35 - 35MOQ: 100 Kilograms
-
Apollo DCS-13DV1-2 Soldering Tip for Apollo Seiko Soldering Robots Apollo Tips DCS Series TipsUS$ 36 - 36MOQ: 100 Kilograms
-
Apollo DCS-20DV1-2 Soldering Tip for Apollo Seiko Soldering Robots Apollo Tips DCS Series TipsUS$ 36 - 36MOQ: 100 Kilograms
-
Apollo DCS-40DV1-2 Soldering Tip for Apollo Seiko Soldering Robots Apollo Tips DCS Series TipsUS$ 35 - 35MOQ: 100 Kilograms
