Apollo Seiko DCN-30DV1 Nitrogen Soldering tips Soldering bit Solder tip Soldering iron tips

Specifications of Apoll DCN-30DV1 Soldering Tip:

• two side tinning
  DC48V, Total Length: 101mm
  Diameter: 6.4mm
  Tip width: a: 5mm, b: 3mm
  Tip thickness (c):1mm
  Tin area, two side (d):3mm

‍‍Advantages of Leisto Soldering Tip:‍‍

• - Made with pure oxygen-free copper

• - Long time electroplating makes the plating layer more denser, the life time is longer than other tips

• - Short lead time for standard robot tips

• - The cost is much lower than original tips

• - Custom made available

‍‍‍‍If the tip is not “wetting” with solder (oxidation): ‍‍‍‍

1. Remove pre-solder on tip completely.

2. Remove oxidation by sand paper after cooling down the iron tip to room temperature.

3. Turn on the power and apply solder on the iron tip during rising the temperature (manually).

Shelia yang

LEISTO INDUSTRIAL CO., LIMITED

‍‍

Skype: leisto.sales5  

E-mail:sales5@leisto.com‍‍

‍‍