Contact Platform Support
Help CenterApollo Seiko TS-08D Nitregen Soldering Iron Cartridge TS Series Tips Apollo Solder Tips
Related Products
-
Apollo Solder Tips TS Series Tips Apollo Seiko TS-10D Nitregen Soldering Iron CartridgeApollo Solder Tips TS Series Tips Apollo Seiko TS-10D Nitregen Soldering Iron CartridgeUS$ 35 - 35MOQ: 100 Kilograms -
Apollo Seiko TS-30D-2 Nitrogen Soldering Tip TS Series Tips Apollo Solder TipsUS$ 35 - 35MOQ: 10 Kilograms
-
Apollo Seiko TS-40D-2 Nitrogen Soldering Tip TS Series Tips Soldering Bit Apollo Solder TipsUS$ 35 - 35MOQ: 10 Kilograms
-
Apollo Seiko TS-50D-2 Nitrogen Soldering Tip TS Series Tips Apollo Solder TipsUS$ 35 - 35MOQ: 10 Kilograms
-
Apollo Seiko TS-30DV1 Nitrogen Soldering Tip TS Series Tips Apollo Solder TipsUS$ 34 - 34MOQ: 10 Kilograms
Apollo solder tips TS series tips
Leisto's production Apollo Seiko compatible soldering tips have good performance such as low temperature difference (plus-minus 10 degree),smooth solder wetting performance.The great base copper & precise plating technology improves the thermal conductivity and reduce the temperature recovery time.The soldering tip can make the robots get the most out of automated soldering: working stable, low faulty soldering joints.
Specifications of Apollo TS-08D Soldering tip cartridge:
2 side tinning
AC100V, total length 101mm
Diameter: 6.4mm
Tip width: a: 3mm, b: 0.8mm
Tip thickness (c): 0.3mm
Tin area, two side (d): 0.8mm
Advantages of Leisto Soldering Tip:
- made with pure oxygen-free copper
- long time electroplating makes the plating layer more denser, the life time is longer than other tips
- short lead time for standard robot tips
- the cost is much lower than original tips
- Custom made available
- offer sample for testing
Tip Cleaning Notes:
If the sponge cleaner is utilized, air-blow cleaning is normally not required.
Some applications require air-blow & sponge tip cleaning (depending upon tip type)
Standard cleaning duration is 0.5 second
The iron tip does not need to be extended if not required
The air-blow cup is not included with the standard Luna system
If the tip is not “wetting” with solder (oxidation)
Remove pre-solder on tip completely.
Remove oxidation by sand paper after cooling down the iron tip to room temperature.
Turn on the power and apply solder on the iron tip during rising the temperature (manually).
The tip will wet with solder by the above process.
Shelia
LEISTO INDUSTRIAL CO., LIMITED
Tel.: +86 755 29472883 H/P: +86 18814350173
Skype: leisto.sales5
Send Inquiry to This Supplier
You May Also Like
-
Apollo Seiko TS-40DV1 Nitrogen Soldering Tip TS Series Tips Apollo Solder TipsUS$ 35 - 35MOQ: 10 Kilograms
-
Apollo Seiko TS-40DV1 for Soldering RobotUS$ 30 - 30MOQ: 10 Kilograms
-
Japan Tsutsumi TKH4-08-E75 Robotic Soldering Tips Tsutsumi TipsUS$ 60 - 60MOQ: 10 Kilograms
-
TM Series Tips Apollo Seiko TM-10D Nitregen Soldering Iron CartridgeUS$ 38 - 38MOQ: 100 Kilograms
-
UNIX Tips P1V12-28 Robotic Slot Soldering Iron Tips for Japan Unix Soldering RobotUS$ 33 - 33MOQ: 10 Kilograms
-
Ersa 832 Series Soldering Tips 0832CDLF/SB Soldering Tips Soldering Bit Solder Tip Ersa TipsUS$ 1.7 - 1.7MOQ: 10 Kilograms
-
Ersa 0832EDLF/SB Soldering Tips 832 Series Soldering Tips Solder Tips Soldering Bit Ersa TipsUS$ 1.7 - 1.7MOQ: 10 Kilograms
-
HAKKO T12-BC3 Replacement Solder Tip Soldering BitUS$ 3.2 - 3.2MOQ: 50 Kilograms
-
HAKKO T12-B Replacement Tips,T12 Series Tips, Hakko TipsUS$ 3.2 - 3.2MOQ: 50 Kilograms
-
TKN5-13PPS30-3 Robotic Soldering Iron Tips for Tsutsumi Soldering RobotUS$ 55 - 55MOQ: 10 Kilograms
