OEM 3G IO Interface Vehicle GPS Tracking Devices with RS-232 Serial Port

Delivery Time:5 working days
Certification:CE, FCC, IP65

OEM 3G IO Interface Vehicle GPS Tracking Devices with RS-232 Serial Port

Water-proof casing design is a patent can prevent GPS device was damaged by into water, use aviation socket for IO interface, easy to connect with cables; CAN/485 BUS interface, easy to control vehicle; 1 route AD input interface can detect fuel consumption and temperature; especially suitable for engineering truck, special vehicle that run in severe environment.

Main features:

● Based international newest chip, double core structure, build-in RTKe OS, powerful.

  ● GPRSand SMS double channels, TCP and UDP double working mode

  ● Positioning based GPS reflected wave, assist with base station, strong capacity to prevent blocking to reduce the blind area

  ● Three proofing design, Quadruple protection for power source, 4 levels watchdog

● Anti-dismantle design for SIMcard

  ● Low power consumption

  ● Build-in high capacity backup battery

● CAN/485 BUS interface.

  ● It can update remotely, easy to maintain

  ● Approved by 3C, and approved by national grade quality authentication.

Product functions:

1.Signal detecting and control: 6 routes signal sensor, 7 vehicle status detecting, intelligence mode and forced mode to cut fuel/circuit; user-defined backup output control.

2.   Alarm: 8 alarms, 3 modes of alarm.

3.   Monitoring: vehicleautomatic tracking/monitoring, regions setting, geo-fence, GPS mileage statistics, blind area supplementary report, traces storage, base station positioning.

4.   BUS communication: via CAN/485 BUS to achieve two ways communication between PLC controller and service center, real time monitor vehicle status and control vehicle.

5.   Fuel consumption detecting: build-in AD input interface, equipped floater attenuation cable can measure fuel consumption.

6.   Remote update: main device’s program was support to remote download; user can renew the program remotely.

7.Protection:

    Power saving mode: in this mode, GPS device’s working current will drop to30mA@12V when vehicle was in flameout.

  Car battery over discharge protection: it will switch to supply power by backup battery if car battery’s voltage is very low (10V).

Over voltage protection: it will cut the external circuit to protect GPS device if the voltage exceeds limit value (60V), backup battery can work for 3h.

Performance parameters:

Performance parameter: : Hardware features		Remark
Hardware framework	Adopt double core chip, RTKe embedded OS
Communication module	GPRS, SMS double channels module
Reliability design	Quadruple protection for power source, 4 levels watchdog
PCB protection	Three proofing protection
Water-proof design	Water-proof design for casing, water-proof grade IP67
Technical specifications
Working voltage	10～60 V/DC
Limiting voltage	100V/DC
Car battery protecting voltage	Low: 10V(12V car battery)or 20V(24V car battery)high:60V
Power voltage of Anti-reversed connection	≥100V
Average working current	70mA DC 12V
Power saving mode	＜30mA DC 12V