PS-N60/80 60W/80W EFR CO2 laser power supply for EFR CO2 laser tube F2 and ZN-1250

    PS-N60/80 60W/80W EFR CO2 laser power supply for EFR CO2 laser tube F2 and ZN-1250

OVERVIEW                                                                                                

EFR power supplies for EFR CO2 laser tubes adopt zero-current half-bridge soft-switch circuit to ensure the equipment has advantages of high efficiency, rapid response speed and simple port control, and applicable to two signals – high and low level. TTL level is to control the laser on/off, in the meantime, the power supply has an anomalistical protective switch to check whether the outer water and air, etc. are free or not.

Adjust the laser power: Input imitative signal, from 0 to 5V, or input PWM signal to control the output laser power.

PICTURES                                                                                                 

PS-N60/80 60W/80W EFR CO2 laser power supply for EFR CO2 laser tube F2 and ZN-1250

PARAMETERS                                                                                          

ADVANTAGES                                                                                          

1. Excellent compatibility;

2. To lengthened the serice life of the tube;

3. The feedback port in the power will be used for closed-loop control and operating current checking;

4. Open power protection in the power has these function: the power can work for a short time in the state of open circuited while the case touch the ground well-- avoid damage to the machine, finally, lengthened the service life of the power.

AGING CHECK BEFORE LEAVING FACTORY                                       

Each power supply before sold will go throuth the ageing tests, which is made at tempareture 65ºC with full-load condition and sustains 10 hours, is turned on/off 300 times within 7 seconds. 

COMPANY INFORMATION                                                                       

Shenzhen Reliable Electromechanical Technology Company is a professional supplier for high quality laser engraving&cutting machine and parts, located in Shenzhen City, Guangdong Province.