Contact Platform Support
Help CenterMYKZ40W Jinan Mingyu 40W CO2 Laser Power Supply for Senfeng Stamp Engraving Machine
Related Products
-
MYJG40W Jinan Mingyu 40W CO2 Laser Power Supply for Mini Laser Cutting and Engraving MachineUS$ 70 - 80MOQ: 1 Piece -
MYJG150W New CO2 Laser Power Supply 150W With Signal Fault Diagnosis, Voltage Regulator and LED Display for CO2 Laser TubeUS$ 150 - 250MOQ: 1 Piece
-
MYJG100W New CO2 Laser Power Supply 100W With Signal Fault Diagnosis, Voltage Regulator and LED Display for CO2 Laser TubeUS$ 150 - 200MOQ: 1 Piece
-
HY-E150 High Quality 150W CO2 Laser Tube Power Supply for Long Life EFR CO2 Laser TubeUS$ 240 - 250MOQ: 1 Piece
-
HY-E100 High Quality 100W CO2 Laser Tube Power Supply for Long Life EFR CO2 Laser TubeUS$ 160 - 170MOQ: 1 Piece
MYKZ40W Jinan Mingyu 40W CO2 laser power supply for Senfeng stamp engraving machine
Laser power supply 40W spare parts for laser machines, mainly for Senfeng stamp laser engraving machine.
Medium production power level for deeper, high speed engraving and slightly thick cutting operations.
MYKZ40W is applicable to laser tube 20w 450mm,40w 600mm,700mm 40w 850mm, mainly used in stamp engraving machine.
Advantages
MYJG150W power supply for CO2 laser tube adopts zero-current half-bridge soft-switch circuit to ensure the equipment has the advantages of high efficiency and rapid response speed, applying to laser tubes from different factories.
Its simple control port is applicable to high/low level signal. TTL level is to control the on/off of the laser with an anomalistic protective switch to check water-flow and ventilation, etc.
Adjust the power: Input analog signal(0~5V) or PWM to control the output power.
Open power protection in the power supply has these functions: the power supply can work for a short time in the state of open circuit while the case touches the ground well so as to avoid damage to the power supply caused by the laser tube burst.
Ageing check before consignment:
Each power supply before selling will go through the aging check:
(1) sustain 10 hours at temperature 60 ℃ under full-load condition;
(2) 500 times on/off check for 7 seconds.
The power supply comes with a full year warranty since the formal acceptance date.
Shenzhen Reliable Electromechanical Technology Company is a professional laser equipment supplier, committed to the R&D, production and sales of laser marking machine, laser cutting machines and laser engraving machines, as well as laser equipment parts.
Send Inquiry to This Supplier
You May Also Like
-
1-5mw Mini Red Laser Module for Laser Alignment and Gun Laser SightUS$ 1 - 20MOQ: 10 Pieces
-
SUDA Mini Laser Garment Machine CNC LASER CUTTER---SL4030NegotiableMOQ: 1 Set
-
980nm ir Test Card of Infrared Laser(HT582)US$ 30 - 100MOQ: 100 Pieces
-
Laser Tube 100wUS$ 50 - 300MOQ: 6 Pieces
-
Laser 532nm, 5mw Dot Laser ModuleUS$ 7.6 - 8.9MOQ: 3 Pieces
-
RECI CO2 Laser Tube 100w 10000 Hours Working LifeUS$ 560 - 700MOQ: 1 Piece
-
New Original SF-HD80US$ 0.1 - 0.12MOQ: 1 Piece
-
1.5μm/2μm Laser Welding: The \"Light\" Solution for Precision Welding of Transparent PlasticsNegotiableMOQ: 10 Sets
-
Z Series Electric Motor Universal MotorUS$ 25000 - 32000MOQ: 1 Piece
-
Laser Trimming Probecard and Blade ProbeNegotiableMOQ: 100 Units
