Best choice! block polishing machine,gasoline generator,4-18 meter Concrete spreading machine with low price

Jining Ouke is a professional production and sales of concrete vibrating beam, 18m combined type vibrating beam medium light construction machinery. The company with strong technical strength, sophisticated production equipment, improve the manufacturing process, strict quality control to customers provide extremely high quality of the products.

Honda engine vibratory concrete truss screeds, concrete finish screed,

Specifications 

Material: Steel, aluminum

1-2m single link

Operating frame

Famous bearing

Gasoline engine or electric motor

Length: free combination 4-18 M

Description of  Honda engine vibratory concrete truss screeds

The biggest advantage of the concrete vibrating beam is that it can be according to customer's requirement, and the working face of different construction surface, lengthen or shorten the working face of the vibrating beam, and the maximum of 18M concrete can be extended to the concrete construction. Construction of the framework vibrating beam is a set of concrete ground compaction, leveling, vibration tamping and provided integrated pulp and the small construction machinery and equipment.

Features of  Honda engine vibratory concrete truss screeds

1. Equipped with the international famous brand HONDA gasoline engine, famous brand quality assurance, superior performance, easy to start.

2. The main shaft bearing selection of the international well-known NSK strong earthquake resistant exterior ball for the heart bearing, to ensure the machine performance. The spindle is not less than 0.05mm, to ensure that the machine can rotate at a high speed for a long time.

3. The single section is connected with the super universal joint, which can adjust the 10-30 degree arch.

4. The overall framework of the whole steel structure, strong earthquake.

5. Leveling floor can freedom of assembly, disassembly, greatly reduces the maintenance cost.

6. Surface spray, beautiful appearance, anti rust and corrosion resistance.

  1.Honda engine vibratory concrete truss screeds physical display.

2.Production process focus on every detail, details determine the quality of the product, quality assurance of product quality. We believe that details determine success or failure.Good details, is the best service to customers.

 3.  We have a large inventory, to ensure the timely supply, on time delivery.

Job requirements:

1. The use of the strength of C25# concrete.

2. Concrete should be a one-time pouring to the design level (preferably structural concrete direct casting).

3. The design of the pan slope 1.5%-2% must ensure that the minimum value of concrete thickness is not less than 10cm.

4. According to the location of the workshop structure pile, reasonable design of the location of the ground expansion joints, the vibration beam can be adjusted to 3-18 meters can be, the general optimal width of 4.5-15 meters.

5. Back filling requirements of full compaction, and according to the pan slope backfill height.

6. The slump value satisfied with 120mm + 20mm.

7. Concrete water cement ratio is not higher than 0.5

8. The maximum diameter of 30 mm, 8 concrete aggregate

9. The concrete smoothness should meet + + 5mm/2m (GB)

We use standard export wooden case to pack  Concrete Vibratory Truss Screed Automatic Concrete Leveling Machine. As for the shipping the best transportation mode will be sea transportation. The cost will be very low. Our cooperated shipping agent can ship products to any port all over the world.

We will send you the machine(1-5 sets) during 3 days after deposit received

It takes 3 days to complete production
5 days domestic shipping to sea port
7 days loading goods and complete Chinese Customs
15~35 days on the sea shipping to your country