Contact Platform Support
Help CenterBest Quanlity Room Temperature Zinc Phosphate Coating for Metal Surface Finishing
Related Products
-
China Suppliers Zinc Phosphate Coating for Metal Surface Finishing|Application in Automotive, House Appliances IndustryUS$ 1.6 - 2.2MOQ: 2000 Kilograms -
Mid Temperature Black Phosphate Coating ChemicalsUS$ 2.1 - 2.6MOQ: 2000 Kilograms
-
Galvanized Sheet Special Nano-ceramic Conversion Coating Before Powder CoatingUS$ 3.8 - 4.5MOQ: 2000 Kilograms
-
Zinc-Calcium Phosphate Coating ChemialsUS$ 2.0 - 2.5MOQ: 2000 Kilograms
-
Saline Treatment Agent for Metal Pretreatment Before PaintingNegotiableMOQ: 2000 Kilograms
IC－2001-1 Znic-Series phosphate coating agent
1. Overview
IC-2001-1 phosphate coating agent assigned two kinds including IC-2001-1A for preparation and IC-2001-1B for adding, which is little-sediment and low-temperature phosphating agent for surface phosphating of iron and steel parts, cold-rolled sheet. There are some advantages, such as low-temperature, fast filming, little sediment, light pollution. Phosphate coating is thin and firm, dense and uniform, and nuclei is small. The product is suitable for large-scale spraying line or the combination of spraying and dipping with strong processing capability. It is the representative product of high-quality products bonderite developed by our company.
2. Using method
2.1 Tank liquor preparation (1 ton)
a. Tank reagent: IC-2001-1A zinc-series phosphate coating agent
IC-2001-1B zinc-series phosphate coating agent
NT-125 neutralizer
AC-1301 accelerator
b. First, add water to tank with 50 % of the capacity of tank. Second, add NT-125 neutralizer of 4.5 to 5.0 kg. Third, add IC-2001-1A of 50 kg and stir evenly until flocculent precipitate was completely dissolved. Finally, adding margin water, and stir evenly. Confirm process indicators , heat to processing temperature. Before using, add AC-130 accelerator of 1.6 kg and stir evenly.
2.2 Tank liquid management
Total acidity: 18 to 36
Free acidity: 0.9 to 1.8
Accelerator: 2.0 to 5.0
Temperature: Dipping: 15 to 35 degrees
Spraying: 35 to 45 degrees
Time: Dipping: 15 to 25 minutes
Spraying: 2 to 4 minutes
Spraying pressure: 0.6 to 1.0 kg/cm2.
Send Inquiry to This Supplier
You May Also Like
-
No Harm Non-toxic Environment Friendly Metal Grinding Fluid | Lubricating, Cooling , Cleaning , Anti RustUS$ 2.0 - 3.0MOQ: 1000 Kilograms
-
VCI Anti Rust Powder, Volatile Corrosion Inhibitor, Metal Anti Rust AgentUS$ 15 - 25MOQ: 100 Kilograms
-
VCI Anti Rust Desiccant, Volatile Corrosion Inhibitor, Metal Anti Rust AgentUS$ 15 - 25MOQ: 100 Kilograms
-
China Suppliers High Grade Steel Machining Antirust Water Soluble Cutting OilUS$ 2.5 - 3.5MOQ: 2000 Kilograms
-
China Suppliers High Grade Extreme Pressure Water Soluble Cutting Oil for Stainless Steel MahiningUS$ 2.5 - 3.5MOQ: 2000 Kilograms
-
No Corrosion Aluminum Alloys Water Soluble Cutting Mahining OilUS$ 2.5 - 3.5MOQ: 2000 Kilograms
-
Metalworking Cutting Fluid, Synthetic Cutting Fluids, Water Base Cutting FluidsUS$ 2.4 - 3.0MOQ: 1000 Kilograms
-
Degreasing Agent for Metal, Metal Stain Removal, Alkaline DegeaserUS$ 1.8 - 2.5MOQ: 1000 Kilograms
-
China Factory Aluminum Cleaning Agent With no CorrosionUS$ 1.8 - 2.5MOQ: 2000 Kilograms
-
Cast Aluminmum Cleaning Agent With Factory PriceUS$ 2.0 - 2.8MOQ: 2000 Kilograms
