3000BPH Water Filling Machine for 330ml - 2500ml PET Bottle CGF8/8/3
water filling machine/juice filling
machine/mineral water filling machines
Working principle of water filling machine
When bottles are sent to the machine by conveyor continuously, they firstly are deliveried to the receiving wheel by air-slide conveyor and then to washing part. The bottle clamps hold the bottles and trun over 180°to wash, then return back to their original position after enough washing and drying. Then, the bottles are sent to the middle thumb wheel 1 and to the filling part to be filled, then moved by middle thumb wheel 2 and reach to capping part to be capped, at the same time, cap trimmer sends caps to the top of the bottles and capper screws caps. At last, bottles are sent to the conveyor chain by the out stirring wheel to next working position.
Main characteristics of water filling machine
1.Adaptability is wide: Because all parts have a height adjust device, the height of bottle can be adjusted within the range of 120~320mm, the diameter can be adjusted within the range of Φ40-100mm.
2.Production capacity can be adjusted continuously: using a frequency inverter to control the speed. So it works more reliable.
Send Inquiry to This Supplier
You May Also Like
-
PET Bottle Mineral Water Filling MachineUS$ 10,000 - 30,000MOQ: 1 Unit
-
Water Bottle Capping Machine/Water Bottling PlantUS$ 10,000 - 30,000MOQ: 1 Unit
-
High Quality Full Automatic Small Bottle Filling MachineUS$ 10,000 - 50,000MOQ: 1 Unit
-
Automatic Water Filling MachineUS$ 10,000 - 30,000MOQ: 1 Unit
-
Automatic Mineral Water PET Bottle Filling EquipmentUS$ 1,000 - 32,000MOQ: 1 Set
-
Automatic Pure Water Filling MachineUS$ 10,000 - 30,000MOQ: 1 Unit
-
Drink Water Packing MachineNegotiableMOQ: 1 Unit
-
Bottled Mineral Water / Alkaline Water Filling MachineUS$ 10,000 - 50,000MOQ: 1 Unit
-
Small Capacity Water Filling MachineUS$ 10,000 - 50,000MOQ: 1 Unit
-
Automatic Small Bottle Production Line CostUS$ 1,900 - 10,000MOQ: 1 Unit








