Bottom Discharge Industrial Air Cooler With RoHS Approval

Specifications

Less Investment
Larger Effectiveness
Power Saving
Strong Cooling Effect
Superior Air Quality

1.Summary:

 

The Bottom Discharge Industrial Air Cooler With RoHS Approval is a set of cooling,ventilation, dust odor in an 

 

evaporative cooling ventilation unit. By the large surface area of specialty corrugated paper- like nest of honey 

 

wet curtain, energy efficient fans, water system, water float valve device. 

 

Chassis and electrical components and other components. When the fan is running a negative pressure 

 

chamber of household air cooler, so that outside air into the cavity through a highly absorbent wet curtain of 

 

water on wet curtain evaporated under adiabatic state, take away a lot of latent heat, purifying, cooling oxygen 

 

the air- conditioning was fan into the workshop, through continuous convection, so that the factories and 

 

workshops to achieve the cooling effect.

 

2.Advantages:

(1) Less investment, performance 

(2) Using environmentally friendly can not close the doors and windows. 

(3) Able indoor cloudy, hot and smelly air to replace exhausted to the outside. 
(4) Less power consumption, electricity consumption per hour in 0.5 - 0.8 degrees, no Freon. 
(5) Each household air cooler air volume :1000-4000 cubic meters per liter. 
(6) Each covering an area of cold 20 - 40 square meters. 
(7) Cool main pieces (wet curtain) are imported.

 

3.Specification:

 

specification	Voltage	Power	Air Flow(m³/h)	Motor RPM	Pump Power	Water Consumption	Cooling Capacity	Outer Size(mm)
GLT-15000	380v	0.75kw	14000	1400r/min	0.45kw	8L/h	9000Btu	1050*1050*920

 

4.Products Show: