Broiler Chick Poultry Nipple Drinker and Feeder Pan

broiler chick poultry nipple drinker and feeder pan

Automati chicken nipple drinker system:

Function:Supply clean water to each nipple steady, chicken can drink water from 360 degree freely.

Main parts of automatic nipple drinking line system:

1).Front part of watering system: Adjust water supplying pressure and stabilizing drinking volume, this part

is usually installed in control system.

2).Water square pipe with nipples and drip cup:3m/12nipples,3m/15 nipples are optional.

3).Anti-perching system: prevent chickens stand on the water pipe.

4).Lifting and suspension system: Correct height for drinking system is very important for chicken(both higher

and lower can effect chicken bone’s distortion , it’s bad for chicken growth, and also can have some water

wasting), it’s very easy to adjust drinking system’s height if use this system.

5).Water dislay level tube: Use high transparency & impact resistant material, it’s sturdy and durable, and

convenient to watch water level. This device with advanced design, it’s very easy to take down and clean.

6).Pressure regulator: Regulating stability, high switching performance, water supply is sufficient& equality,

recoil cleaning with good cleaning result and can save time and water.

7).Medicator (French Dostran):

Can add medicine into drinking system automatically.

Don’t use power, it’s economic and reliable.

Accurate, after setting, it can adjust medicine volume according to water pressure change.

Its easy to control and maintain with good corrosion resistance.

automatic chicken feeder system including:

Main feed line:Silo/manpower hopper is the beginning of main feed line. There is a feed sensor at the end

of main feed line which controls motor on and off to achieve automatic feed delivery.

Advantages:Reduce labor intensity, one person is enough for one house.

Main components of main feed line system:

(1).Silo features: Material: Galvanized sheet; Capacity:2.5T to 27T; Silo boot: one/two/three/four outlet

Silo parameters:

(2).Driving motor: 0.75kw, 380V, 50HZ, three phase, AC current

(3).Feed conveying pipe: diameter: 75*3.6mm, Material: PVC; Auger from South Africa, Feeding abality: 1400kg/h

(4). Feed Level sensor: Germany IFM feed level sensor.   

(5).Manpower hopper: If you don't use silo, you can use manpower hopper.Usually,if you just build one or two

farm,we suggest you use hopper instead of silo.

chicken feeder pan system:

High-quality special driving reduction motor:

Taiwan Motor with overload protection of IP55)

Power:0.75kw Voltage:380V Frequency: 50HZ, three phase AC current

V-shaper Bin(with hopper): 

Bin volume: 115L,  Material: hot-dip galvanized sheet. Material thickness: 1mm

Feeding system:

Diameter of conveying pipe: 45mm (4-pan/3m, 3pan/3m).

Material: hot-dip galvanized sheet pipe with the zinc coating amount of more than 275 square meter .

Helical spring auger from South Africa feeding capacity:450kg/h.

Sensor from Israel: 

time delay range 0 to 2 hours.

Suspension and lifting system: 

It's very convient to adjust the feeding line height by winch. 

Details of broiler feeder pan:

Features: 

Easy installation.

The system can used consistently from day old to adult.

Long life.

Slates can easy to clear and keep poultry healthy.

poultry nipple drinker and feeder pan Factory information:

poultry nipple drinker and feeder pan contact information:

Please click here to get more information about whole chicken farm equipment.