4" super thin cut off wheel for metal

Specifications

Super thin cut off wheel
1.Size:100x1.0x16
2.Made by aluminum oxide
3.Sharp,long service time
4.Use cutting metal,steel,iron

Factory Advantages 

1.Near to raw materials region,low labor costs,so lower production cost,competitive price

2.Locate in the center of China,low and almost same transport costs to any China main port,

3.Advanced technique,

4.More than 10 years production experience,

5.Strict quality testing,good after-sale service, 

6.ISO9001:2000 certificate

7.Abundant export experience

8.Accept OEM brand,

9.Small order is accepted

10.Free samples to test quality.

Raw Materials

High hardness abrasive:ensure cutting sharp sex

High quality reinforced net:ensure the product use security

High quality adhesive resin:ensure good durable performance

Powder phenolic resin:Good technological efficiency,a smaller forming density,greater abrasives structure.

Product:

Size(mm)	Size(inch)	Shape	Description(A46#QBF)	Colour	Speed(r.p.m)	Speed(m/s)
100x1.0x16	4x1/24x5/8	flat	1.Material:Aluminium oxide 2.Grit size 46#, 3.Hardness(1):Q 4.Bonding agent:resin 5.Reinforced net:two fiberglass nets	Brown,black	15200	80

(1)Generally,please chose reasonable hardness cutting wheel to reduce its attrition wear.These factors can affect the cutting wheel hardness:The amount of resin bond to join,Forming density of abrasive,Sintering temperature and sintering temperature etc.

PER CUT super thin cutting wheel have following advantages:

1.Propritary aluminium oxide material mix ensures durable long life,

2.Imported resin bonded makes our disc stronger,

3.The two high strength reinforced glass fiber nets,very hard,

4.Very fast and smooth cutting performance,

5.Clean cutting,better surface finish,

6.Thickness is thin,the cutting edge is narrow, effective on light gauge section,

7.Small electric current,workpiece cross section burns lightly,

8.No vibration and no bouncing on work place,

9.The cutting dust is light,the working conditions are good,

10.High cutting efficiency,excellent durability.

Usage:

Used for cutting metal,hard metal,like iron,inox, general steels,nonferrous metal,aluminum,copper etc

1.cutting sheet metal -cutting pipe

2.foundry/forge shops-gate/riser removal

3.cutting forgings-metal plate dimensioning

4.ship building-metal fabrication

5.tool room-cutting drill bits,steel bar,tubing,metallurgical sectioning

Automatic production line:ensure the stability of our products

Performance testing site

The cutting workpiece:D12mm 201 Stainless steel

After cutting 10 times,the diameter of the cutting wheel:94mm

After cutting 20 times,the diameter of the cutting wheel:85mm

After cutting 30 times,the diameter of the cutting wheel:70mm

The test report

test result is one piece of 105*1.2*16 mm ,cuting finished.
Size	cutting object	cutoff quantity	efficiency SEC/cutoff	quality
Φ105×1.2×16mm	Φ10mm SS rod	85	4	A
Φ105×1.2×16mm	Φ10mm SS rod	55	5	B
Φ105×1.2×16mm	Φ10mm SS rod	27	7	C

Cutting result

Install and use advice:

1.Do visually inspect all wheel before mounting for possible damage.

2.Do make sure operating speed of machine, does not exceed speed marked on wheel.

3.Do check mounting flanges for equal size,relieved as required and correct diameter.

4.Make sure workpiece is stable.Hold the tool so that the wheel is at a perpendicular angle to the workpiece being cut;

5.Keep a light touch, as the wheel will break under too much pressure. Do not bump the wheel to start a cut;

6.Feed the wheel through the work as fast as possible without slowing the wheel in the cutting.

Safety Recommendations:

1.Wear protective goggles
2.Wear protective gloves
3.Wear ear protectors
4.Wear dust respirators
5.Observe safety recommendations

Packing:

1.During transport,please load and unload carufully to prevent the crack and shock.Ensure packing without damage.

2.During storage,put the wheels horizontally,donot touch the floor directly. 

3.Should prevent moisture and direct sunlight,keep the warehouse shady and ventilated.The warehouse's temperature can not be less than 5 degrees.

Dimension mm	Dimension inch	Speed r.p.m	Speed m/s	G.Weight kg	Dimension L*W*H(mm)	Box Qty
						Piece/ box	Piece/ bigbox
100x1.0x16	4x1/24x5/8	15200	80	18	440x230x170	25	800
100x1.6x16	4x1/16x5/8	15200	80	25	440x230x225	25	800
115x1.2x22.2	41/2x3/64x7/8	13300	80	25	500x260x185	25	800
115x1.6x22.2	41/2x1/16x7/8	13300	80	17	500x260x175	25	400
125x1.2x22.2	5x3/64x7/8	12200	80	22	410x280x185	25	600
125x1.6x22.2	5x1/16x7/8	12200	80	20	410x280x225	25	400
150x1.2x22.2	6x3/64x7/8	10200	80	21	330x330x185	25	400
150x1.6x22.2	6x1/16x7/8	10200	80	28	330x330x225	25	400
180x1.2x22.2	7x3/64x7/8	8500	80	23	390x390x145	25	300
180x1.2x32	7x3/64x1 1/4	8500	80	23	390x390x145	25	300
180x1.6x22.2	7x1/16x7/8	8500	80	30	390x390x175	25	300