Car Polisher Backing Plate

  Foam Car Care Backing Plate for Car Polisher    

For optimum results, you need quality backing plates on your dual-action polisher. The backing plates are more important than you might think. Not only do they hold your pad in place, a good backing plate will also be flexible enough to conform to the curves of your vehicle and will evenly distribute the weight and pressure of the machine. It should also absorb some of the vibration.

The Flexible backing plates are made of high quality polyurethane which is very durable and dampens vibration from your polisher. The polyurethane surface is uniform and balanced so that your results will be even. And these pads will not get hot like cheaper pads. The hook & loop attachment system fasteners are permanently molded to the polyurethane so your pads will lock securely in place.

We offer 5 inch ,6 inch and 7 inch backing plates to fit most standard polishers. Use pads of a larger size to allow proper overhang so the edge of the plate will not scratch your vehicle. Check out our selection of buffing, polishing, and cutting pads to see which right for your detailing job.

The Features of Foam Car Care Backing Plate for Car Polisher  :

• The car polishing foam pad is made of high density foam which is ideal for scratch and defect removal.
• The red foam offers the correction of a typical compounding pad whilst at the same time allowing the polishing ability of light cut foam pad. When used with heavier compounds it will remove moderate swirls and scratches with little or no haze.
• The car polishing foam pad is an all around pad that will work on most light to moderate imperfections.
• The car polishing foam pad has no cut and will apply thin, even coats of waxes, sealants, and glazes.

How to Use the Foam Car Care Backing Plate for Car Polisher  :

1,The Foam Car Care Backing Plate for Car Polisher are designed to fit most dual action polishers.

2,The Foam Car Care Backing Plate for Car Polisher te are for MS paint.

3,The Foam Car Care Backing Plate for Car Polisher are for UHS/Scratch Resistant Clears.

4,The Foam Car Care Backing Plate for Car Polisher are for HS Paints.

1. By ship       polijsten schuim; pulido de escuma; poliranje pjene; poliranje pjene
2. EXPRESS: around 5-7 working days to arrive    illustrar fowm; menggilap buih
3. INTERNATIONAL AIR MAIL: around 2-4 weeks to arrive    polishing npaus; polering skum