EFM Flow Meter /electromagnetic Flowmeter (ISO19001:2008 Standard),digital Flow Meter
Product Name: EFM flow meter /electromagnetic flowmeter (ISO19001:2008 Standard),digital flow meter
1. Introduction:
KDLD electromagnetic flowmeter ,It is mainly used to measure the volume flow of conducting liquid and slurry in closed pipeline.
Electromagnetic Flow Meter
Electromagnetic flowmeter:
1).Instrument accuracy:Insert:2.5% Pipline:0.5%, 0.2%
Applicable Medium: Suitable for various speeds liquid and liquid-solid two-phase flow which conductivity greater than 5μS/cm .
2).Characteristic:
1. Almost no additional pressure loss during measurement
2.Actually it could modification range on-line according to user's need
3.Measurement results have nothing with velocity distribution and fluid pressure, temperature and density and other viscosity physical
parameters.
3)The parameter for Choose electromagnetic flowmeter :
(Which need you offer the follow data to selected the meter for you)
1. Pipe Diameter
2. The name is measured medium(the measured object must be conductive,conductivity≥5uS/cm )
3. Tested medium working pressure(The Max and Min figure)
4. Temperature of Tested medium(The Max and Min figure)
5. The working flow tested medium(The Max and Min figure)
6. Whether need the output or communication signal.
The requirements of install place on Electromagnetic flowmeter :
1.When measuring mixing phase fluid, Choose the place could not to cause the separation
2.when measuring Two-component liquid, Avoid to install in downstream place where the liquid mixed uneven
3.When measuring the chemical reactions ,install in downstream section where fully completed reaction.Try to satisfy straight section
do not less than 5D (futher) and 2D (after) respectively
4.To find the places easy to realize sensor alone grounding
5.To avoided surroundings have high corrosive gas
6.To avoided measurement tube into negative pressure,’
7.Avoid near a large motors or large transformers, lest cause electromagnetic interference
8.Choose the place, little vibration especially for integrated instrument
9.To aviod the directly sunshing
Protective level
IP65. water prevent type. Allows the water faucet spring from any direction of sensor,Spring Pressure :30Kpa,water yield:
2.5L/s.Distance:3m.
IP68. Diving uld long time working in water
Send Inquiry to This Supplier
You May Also Like
-
Industrial F111 Hot-Insertion Flow Sensor | Stainless Steel/Brass Body, Battery-Powered Option, Compatible With Data LoggersNegotiableMOQ: 1 Piece
-
Vortex FlowmeterUS$ 230 - 970MOQ: 1 Piece
-
ASTM C518 Heat Flow Conductivity Meter Thermal ConductometerUS$ 9,580 - 12,580MOQ: 1 Set
-
Singflo 3 Inch Flow Meter/mini Digital Diesel Fuel Flow Meter/flow Meter WaterUS$ 29 - 50MOQ: 10 Pieces
-
Liquid Flow Meters/turbine Flow MeterUS$ 6 - 7MOQ: 20 Pieces
-
Flow Measuring Instruments Electromagnetic Flow MeterUS$ 163 - 1,311MOQ: 1 Piece
-
Fuel Flow MeterUS$ 25 - 50MOQ: 50 Pieces
-
Water Turbine Meter PriceUS$ 45 - 1,633MOQ: 20 Pieces
-
Meter Mechnical Display Measure InstrumentUS$ 1 - 500MOQ: 1 Set
-
Water Spray/leak Irrigagtion ControllerUS$ 5 - 5MOQ: 50 Units







