MIC-12-12-1 Lifetime after sale service Europe standard with CE Output 800-1200B/hr for glass bottle soda bottling machine

According to customer’s requirement, we will offer our technician for oversea to install and adjust MIC-12-12-1 Lifetime after sale service Europe standard with CE Output 800-1200B/hr for glass bottle soda bottling machine service.
We can also provide our Sales as translator to your site help the installation and Training.
Only to provide the local transportation, accommodation, air tickets (round trip) for Sales will be fine.

This machine need air compressor, 0.8 m3/min 10Kg is enough
This machine can be connected with:
- Water treatment system
- Glass bottle depalletizer or Glass bottle unscrambler
- CO2 Mixer
- Glass bottle defoaming device
- Glass bottle sterilizing tunnel
- Glass bottle dryer system
- Glass bottle liquid level inspector

- Glass bottle self-adhesive sticker or cold glue labeling machine
- Filled can secondary packaging system (shrink-wrapper or carton packaging machine)
- Palletizing system

For Glass bottle soda bottling machine question:
First of all, Before we operate Glass bottle soda bottling machine, to clearly understand the instructions clearly Glass bottle soda bottling machine, first read through the instructions again, adjust and use the familiar Glass bottle soda bottling machine, the operating time must be in strict accordance with the instructions to Glass bottle soda bottling machine instructions, pay attention to details of the problem, certainly the details determine success or failure
Secondly, In accordance with the instructions on the machine for regular repair and maintenance of the Glass bottle soda bottling machine fuselage Oil it, so Glass bottle soda bottling machine body as far as possible to protect the reservoir, so that the air can be isolated to avoid Glass bottle soda bottling machine rusty, well protected Glass bottle soda bottling machine body, and this is a way to extend the life of the 3 in1 filling machine.
Once again, we have to pay attention to hot stand -sealing cloth for cleaning, not retained foreign body in the above, to ensure clean Glass bottle soda bottling machine try to avoid the amount of material for a long time into the mouth of the left cause corrosion.
Fourth, We should always check the machine to see contacts at various parts of the machine is good, important to ensure safe use of electricity, no electricity properly to prevent harm.
Fifth, If found faulty , we have to turn off the power , when necessary, by pressing the emergency stop button , and then deflated lift cover, and then close the voltage , check the reason , and troubleshooting.
Thank you for choosing MIC MACHINERY CO.,LTD

http://www.micmachinery.en.china.cn/